2-channel digital input terminal 120 V DC EL1712-0020
Signal LED 2
Signal LED 1 
Power contact
120 V
Power contact 0 V
Power contact PE
Input 1
Input 2
120 V
0 V
Top view 
Contact assembly 

EL1712-0020 | 2-channel digital input terminal 120 V DC

The EL1712-0020 digital input terminal acquires binary control signals from the process level and transmits them, electrically isolated, to the higher-level automation device. Direct connection of DC sensors is possible. The EtherCAT Terminal offers two channels that indicate their signal state via light emitting diodes.

Technical data EL1712-0020 | ES1712-0020
Connection technology 4-wire
Number of inputs 2
Nominal voltage 120 V DC
“0” signal voltage 0…40 V
“1” signal voltage 80…140 V
Input current typ. 3.0 mA
Input filter typ. 3.0 ms
Distributed clocks
Current consumption power contacts load-dependent
Current consumption E-bus typ. 90 mA
Electrical isolation 500 V (E-bus/field potential)
Special features direct connection of DC actuators
Weight approx. 60 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all ESxxxx terminals