Digital Combi

IE2403

I/O connection

I/O connection sockets (output)

I/O connection sockets (input)

Signal status display

Power supply
status display:
Box supply (US)

Auxiliary voltage (UP)

0 V

Output

+24 V

1-wire 2-wire 3-wire

Input

1-wire 2-wire 3-wire

Power supply feed

Power supply down-
stream connection

IP-Link interface

IE2403 | 16-channel digital combi input/output 24 V DC

The digital IE2403 I/O module has sixteen channels with eight inputs and eight outputs. The device can therefore be flexibly adapted to the requirements of the application. The outputs handle load currents of up to 0.5 A, are short-circuit-proof and protected against inverse polarity. For the signal connection connectors with a spring-loaded system are used, optionally available with 1 or 3 pins. The module is supplied without connectors.

Technical data	IE2403
Number of channels	16 channels (8 inputs and 8 outputs)
Input/output connections	connector with spring-loaded system
Input filter	3 ms
“0“ signal voltage	-3…+5 V
“1“ signal voltage	11…30 V, 6 mA input current (EN 61131-2, type 2)
Sensor supply	derived from control voltage, max. 0.5 A total, short-circuit-proof
Load type	ohmic, inductive, lamp load
Rated load voltage	24 V DC (-15 %/+20 %)
Max. output current	max. 0.5 A on each channel, individually short-circuit safe
Short circuit current	typ. 1.5 A
Auxiliary power current	typ. 20 mA per channel
Power supply connection	feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Bit width in the process image	8 inputs + 8 outputs
Electrical isolation	channels/control voltage: no, between the channels: no, control voltage/fieldbus: yes, via IP-Link
Operating/storage temperature	0…+55 °C/-25…+85 °C
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27/29
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/variable