




The SinCos module IP5209-Bxxx serves as interface for the direct connection of a measuring sensor, for example a measuring probe with sinusoidal voltage output 1 Vss to the higher-level fieldbus. In contrast to the standard version, instead of a voltage input the special IP5209-Bxxx-1000 version has a current input for 11 µAss measuring probes. The measuring signal is processed, interpolated and made available as a 32 bit value. The signal period resolution is 10 bits, i.e. 1,024 steps. The reference mark is also stored in a 32 bit value. The current count and the reference mark value can be read. The limit frequency for the measuring signal inputs is 100 kHz.
| Technical data | IP5209-Bxxx | IP5209-Bxxx-1000 |
|---|---|---|
| Number of channels | 1 | |
| Connection encoder/sensor | M23 connector with outer thread, 12-pin | M23 connector with outer thread, 9-pin |
| Signal input | 1 VSS | 11 µASS |
| Sensor supply | 5 V DC from control voltage, 0.5 A max. | |
| Limit frequency | 100 kHz (scanning of the input signals with 500 kHz) | |
| Resolution | 10 bits, 1,024 steps per period | |
| Commands | set count, evaluate reference mark latch, change of direction, frequency control | |
| Power supply connection | feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin | |
| Current consumption | 130 mA | |
| Bit width in the process image | input/output: 2 x 32 bit data, 1 x 8 bit control/status | |
| Electrical isolation | depends on the bus system | |
| Operating/storage temperature | 0…+55 °C/-25…+85 °C | |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27/29 | |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 | |
| Protect. class/installation pos. | IP 65/66/67 (conforms to EN 60529)/variable | |