C6920
 
C6920 Control cabinet Industrial PC

C6920 | Control cabinet Industrial PC

The Industrial PC C6920 is designed for control cabinet installation. The compact case is equipped with a 3½-inch motherboard for Intel® Core™Duo or Core™2 Duo. All PC connections are located at the front of the housing. The cooling is done by internal cooling fins and an easily exchangeable fan cartridge at the bottom of the housing.

C6920 Control cabinet Industrial PC
C6920
Control cabinet PC 
Housing industrial PC for space-saving control cabinet installation
mounting sheet at the rear wall
all connectors on the front
status LEDs
lithium battery accessible behind the front flap
slot for one 2½-inch SATA hard disk behind the front flap
slot for 1 Compact Flash card behind the front flap
fan cartridge with speed control and double ball bearing fans, accessible from the front
5 cm (2") free space above and under the PC required for air circulation
protection class IP 20
operating temperature 0…55 °C
weight of the basic configuration 1.9 kg (4.2 lbs)
compact dimensions (W x H x D) 65 x 231 x 116 mm (2.6" x 9.1" x 4.6") without mounting plate
Features processor Intel® Core™ Duo 2.0 GHz
3½-inch motherboard for Intel® Core™ Duo or Core™2 Duo
1 free Mini PCI slot for cards installed ex factory
512 MB DDR2RAM, expandable ex factory to 2 GB
on-board graphic adapter, Intel® GMA950, DVI-I connector
on-board dual Ethernet adapter with 1 x 10/100BASE-T and 1 x 100/1000BASE-T connector
SATA hard disk, 2½-inch, 40 GB
1 serial port RS232 and 4 USB 2.0 ports
24 V DC power supply
Options processor Intel® Core™2 Duo
for variants with Intel® Celeron® M or Pentium® M see price list
mounting plate at the side wall, instead of plate at the rear wall
second serial port led out as RS232, RS422 or RS485, optically linked, overload protection
Mini PCI card with fieldbus interface or Ethernet port
Mini PCI card with up to 512 kB NOVRAM for fail-safe storage of process data
Compact Flash
uninterruptible power supply UPS

Drawings with dimensions

The device must be installed in the orientation that is shown in these drawings.

C6920 Control cabinet Industrial PC