KL2284 | Bus Terminal, 4-channel digital output, reverse switching, 24 V DC, 2 A
+24 V
KL2284 | Bus Terminal, 4-channel digital output, reverse switching, 24 V DC, 2 A
Compact Drive Technology
The KL2284 output terminal switches loads in selectable polarity. This means that DC motors can be used in both directions of rotation. A polarity is switched with two output bits per channel. An interlock prevents simultaneous switching of both directions. Advanced power semiconductors enable safe and wear-free switching with minimum dimensions. The high starting and short-circuit currents of the KL2284 are comparable with a robust relay. The number of switching cycles is almost unlimited.
Product status:
regular delivery
Product information
- Technical data
- Ordering information
- Accessories
- Software
- Documentation and downloads
- Application notes
- Related products
| Technical data | KL2284 |
|---|---|
| Connection technology | 2-wire |
| Number of outputs | 4 x H-bridge circuit |
| Nominal voltage | 0…24 V AC/DC |
| Max. output current | 2 A per channel |
| Breakdown voltage | 80 V |
| Peak current | 5 A (100 ms), < 50 A (10 ms) |
| Electrical isolation | 500 V (K-bus/field potential) |
| Switching on speed | typ. 235 ms, max. 300 ms |
| Switching off speed | typ. 30 ms, max. 50 ms |
| On-resistance | typ. 0.03 Ω |
| Current consumption K-bus | 100 mA |
| Bit width in the process image | 8 outputs |
| Weight | approx. 50 g |
| Operating/storage temperature | 0…+55 °C/-25…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Pluggable wiring | for all KSxxxx Bus Terminals |
| Approvals/markings | CE |
| Housing data | KL-12-8pin | KS-12-8pin |
|---|---|---|
| Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
| Material | polycarbonate | |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm | |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
| Side by side mounting by means of | double slot and key connection | |
| Marking | labeling of the BZxxx series | |
| Wiring | solid conductor (e), flexible conductor (f) and ferrule (a): spring actuation by screwdriver | |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² | s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG 28…14, st*: AWG 28…14, f*: AWG 26…16 | s*: AWG 28…16, st*: AWG 28…16, f*: AWG 26…16 |
| Stripping length | 8…9 mm | 9…10 mm |
| Current load power contacts | Imax: 10 A | |
*s: solid wire; st: stranded wire; f: with ferrule
| Ordering information | |
|---|---|
| KL2284 | Bus Terminal, 4-channel digital output, reverse switching, 24 V DC, 2 A |
| KS2284 | Bus Terminal, 4-channel digital output, reverse switching, 24 V DC, 2 A, pluggable wiring |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2023 - Terms of Use