DetachFixClose

EPP2328-0001 | 4 x digital input and 4 x digital output 24 V DC, Imax = 2 A (∑ 3 A)

EPP2328-0001 | 4 x digital input and 4 x digital output 24 V DC, Imax = 2 A (∑ 3 A)

EPP2328-0001 | 4 x digital input and 4 x digital output 24 V DC, Imax = 2 A (∑ 3 A)

EtherCAT P signal input
EtherCAT P signal output
M8 I/O connection sockets
Signal status display
Labelling areas
Power supply status display:
Box supply (US)
Auxiliary voltage (UP)
1 | TX+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
1 | +24 V DC UP
3 | GND
4 | In-/Output
2-wire
3-wire
Top view 
I/O connection 
Connector assignment 
Inputs 
Outputs 
EPP2328-0001 | 4 x digital input and 4 x digital output 24 V DC, Imax = 2 A (∑ 3 A)

EPP2328-0001 | 4 x digital input and 4 x digital output 24 V DC, Imax = 2 A (∑ 3 A)

EtherCAT P: The one cable solution – One step closer to automation without control cabinets

EtherCAT P: The one cable solution – One step closer to automation without control cabinets

The EPP2328-0001 EtherCAT P Box combines four digital inputs and four digital outputs in one device. A filter constant of 3.0 ms is available for the inputs. The outputs handle load currents of up to to 2 A each, although the total current is limited to 3 A. This makes these modules particularly suitable for applications in which not all of the outputs are active at the same time, or in which not all of the actuators draw 2 A signal current.

The state of each signal is indicated by means of light emitting diodes. The signals are connected via screw type M8 connectors. The sensors are powered by the box supply US.

Product status:

Regular delivery

Product information

Loading content ...

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2021 - Terms of Use