DetachFixClose

EP9214-0023 | 4/4-channel power distribution for EtherCAT Box modules

EP9214-0023 | 4/4-channel power distribution for EtherCAT Box modules

EP9214-0023 | 4/4-channel power distribution for EtherCAT Box modules

EtherCAT signal input
EtherCAT signal output
Power out
Power in
Labelling areas
Outputs
Signalling contact/reset
1 | Tx+
2 | Rx+
3 | Rx-
4 | Tx-
1 | GNDP
2 | GNDS
3 | FE
4 | +24 V DC US
5 | +24 V DC UP
1 | +24 V DC US
2 | +24 V DC UP
3 | GNDS
4 | GNDP
1 | Signalling contact
3 | Signalling contact
4 | Reset
Top view 
Connector assignment 
EP9214-0023 | 4/4-channel power distribution for EtherCAT Box modules

EP9214-0023 | 4/4-channel power distribution for EtherCAT Box modules

The EP9214-0023 enables connection of four EtherCAT Box power supply branches. In each 24 V branch the current consumption for the control voltage US and the peripheral voltage UP is monitored, limited, and, if necessary, switched off.

The power distribution is supplied via a 7/8" connector with up to 16 A (per voltage supply US/UP). Several modules can be configured in a cascade arrangement. In the event of a short-circuit in one of the four outputs, the affected output is switched off. The supply for the other branches remains active. The switch-off and control is done in such a way that the input voltage does not fall below 21 V. During startup consumers with large capacities can be added without problem.

The master can read diagnostic messages from the individual channels via the EtherCAT interface.

 

Advantages:

  • eight independent 24 V DC channels
  • switch-off characteristics selectable per channel
  • channels can be switched on and off individually
  • diagnostic data

 

Independent switching of individual consumer branches is also possible via the EtherCAT master.

Product status:

Regular delivery

Product information

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2021 - Terms of Use