DetachFixClose

ER1518-0002 | 2-channel up/down counter 24 V DC, 1 kHz, 32 bit, adjustable input filters 0…100 ms

ER1518-0002 | 2-channel up/down counter 24 V DC, 1 kHz, 32 bit, adjustable input filters 0…100 ms

ER1518-0002 | 2-channel up/down counter 24 V DC, 1 kHz, 32 bit, adjustable input filters 0…100 ms

EtherCAT signal input
EtherCAT signal output
M12 I/O connection sockets
Signal status display
Labelling areas
Power supply status display:
Box supply (US)
Auxiliary voltage (UP)
Power supply feed
Power supply downstream
connection
1 | Tx+
2 | Rx+
3 | Rx-
4 | Tx-
1 | +24 V DC US
2 | Input B
3 | GND
4 | Input A
5 | n.c.
1 | +24 V DC US
2 | +24 V DC UP
3 | GND
4 | GND
2-wire
3-wire
Top view 
I/O connection 
Connector assignment 
ER1518-0002 | 2-channel up/down counter 24 V DC, 1 kHz, 32 bit, adjustable input filters 0…100 ms

ER1518-0002 | 2-channel up/down counter 24 V DC, 1 kHz, 32 bit, adjustable input filters 0…100 ms

The ER1518-0002 EtherCAT Box with digital inputs acquires binary control signals from the process level and transmits them, in an electrically isolated form, to the controller. The signal state is displayed by light emitting diodes. The signals are connected via M12 screw type connectors. The input filters can be set between 0 and 100 ms via EtherCAT. Inputs 0 and 4 can be used as 32-bit up/down counters.

The sensors are supplied via the control voltage US in two groups of four sensors each. Any short circuits on the sensor side are detected and reported to the controller. The load voltage UP is not used in the input module, but may optionally be connected in order to be relayed downstream.

The EtherCAT Box modules with zinc die-cast housing are ready for use in harsh industrial and process environments. With the fully sealed design and metal surfaces the ER series is ideal for applications requiring enhanced load capacity and protection against weld spatter, for example.

Product status:

Regular delivery

Product information

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2021 - Terms of Use