DetachFixClose

EPP2038-0001 | 8-channel digital output 24 V DC, Imax = 2 A (∑ 3 A), with diagnostics

EPP2038-0001 | 8-channel digital output 24 V DC, Imax = 2 A (∑ 3 A), with diagnostics

EPP2038-0001 | 8-channel digital output 24 V DC, Imax = 2 A (∑ 3 A), with diagnostics

EtherCAT P signal input
EtherCAT P signal output
M8 I/O connection sockets
Signal status display
Labelling areas
Power supply status display:
Box supply (US)
Auxiliary voltage (UP)
1 | TX+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
1 | +24 V DC UP
3 | GND
4 | Output
2-wire
3-wire
Top view 
I/O connection 
Connector assignment 
EPP2038-0001 | 8-channel digital output 24 V DC, Imax = 2 A (∑ 3 A), with diagnostics

EPP2038-0001 | 8-channel digital output 24 V DC, Imax = 2 A (∑ 3 A), with diagnostics

EtherCAT P: The one cable solution – One step closer to automation without control cabinets

EtherCAT P: The one cable solution – One step closer to automation without control cabinets

The EPP2038-0001 EtherCAT P Box with digital outputs connects binary control signals from the controller on to the actuators at the process level. The eight outputs handle load currents of up to 2 A each, although the total current is limited to 3 A. This makes these modules particularly suitable for applications in which not all of the outputs are active at the same time, or in which not all of the actuators draw 2 A signal current.

The signal state is indicated by means of light emitting diodes. The EPP2038-0001 offers output diagnostics in the form of short circuit and open circuit detection per channel. The signals are connected via M8 screw type connectors.

Product status:

Regular delivery

Product information

Loading content ...

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2021 - Terms of Use