DetachFixClose

EPP7342-0002 | 2-channel DC motor output stage 48 V DC, 3.5 A

EPP7342-0002 | 2-channel DC motor output stage 48 V DC, 3.5 A

EPP7342-0002 | 2-channel DC motor output stage 48 V DC, 3.5 A

EtherCAT P signal input
EtherCAT P signal output
M12 I/O connection sockets
Signal status display
Labelling areas
Power supply status display:
Box supply (US)
Auxiliary voltage (UP)
1 | TX+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
1 | A1
2 | A2
3 | B1
4 | B2
5 | n.c.
1, 2 | V Motor
3, 4 | GND Motor
5 | n. c.
1 | GND
2 | V Enc
3 | A Enc
4 | B Enc
5 | C Enc
1 | GND
2 | V Enc
3 | A Enc
4 | B Enc
5 | C Enc
Top view 
I/O connection 
Connector assignment 
DC motor 
Motor supply 
Encoder 
Encoder 
EPP7342-0002 | 2-channel DC motor output stage 48 V DC, 3.5 A

EPP7342-0002 | 2-channel DC motor output stage 48 V DC, 3.5 A

EtherCAT P: The one cable solution – One step closer to automation without control cabinets

EtherCAT P: The one cable solution – One step closer to automation without control cabinets

The EPP7342 EtherCAT P Box enables direct operation of two DC motors. The speed or position is specified by the automation device via a 16-bit value. By connection of an incremental encoder (24 V DC, single-ended), a simple servo axis can be realised. The output stage is protected against overload and short-circuit. The EtherCAT P Box has two channels that indicate their signal state via light emitting diodes. The LEDs enable quick local diagnosis.

Product status:

Product announcement | estimated market release on request

Product information

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2021 - Terms of Use