on the fieldbus)
2 | Output B
3 | GND
4 | Output A
5 | n.c.
2 | +24 V DC UP
3 | GND
4 | GND
IP20x2-Bxxx, M12, screw type
The IP2022-Bxxx digital output connects the binary control signals from the automation unit on to the actuators at the process level. The eight outputs handle load currents of up to 2 A each, although the total current is limited to 4 A. This makes these modules particularly suitable for applications in which not all of the outputs are active at the same time or in which not all of the actuators draw 2 A signal current.The signals are connected via M12 screw type connectors.
The outputs are short-circuit proof and protected against inverse connection.
|Product variants||Communication||Bus interface|
|IP2022-B200||Lightbus||2 x fiber-optic socket for plug ZS1020-0010|
|IP2022-B310||PROFIBUS||1 x M12 socket, 5-pin, B-coded|
|IP2022-B318||PROFIBUS||1 x M12 socket, 5-pin, 1 x M12 plug, 5-pin (tee-connector integrated), B-coded|
|IP2022-B400||Interbus||1 x M23 female socket 9-pin, 1 x M23 male socket 9-pin|
|IP2022-B510||CANopen||1 x M12 plug, 5-pin|
|IP2022-B518||CANopen||1 x M12 plug, 5-pin, 1 x M12 socket, 5-pin (tee-connector integrated)|
|IP2022-B520||DeviceNet||1 x M12 plug, 5-pin|
|IP2022-B528||DeviceNet||1 x M12 plug, 5-pin, 1 x M12 socket, 5-pin (tee-connector integrated)|
|IP2022-B730||Modbus RTU||1 x M12 socket, 5-pin, B-coded|
|IP2022-B800||RS485/RS422||1 x M12 socket, 5-pin, B-coded|
|IP2022-B810||RS232||1 x M12 socket, 5-pin, B-coded|