DetachFixClose

EL2564 | EtherCAT Terminal, 4-channel LED output, 5…48 V DC, 4 A, RGBW

EL2564 | EtherCAT Terminal, 4-channel LED output, 5…48 V DC, 4 A, RGBW

EL2564 | EtherCAT Terminal, 4-channel LED output, 5…48 V DC, 4 A, RGBW

Run LED
Error LED
Output LED 1
Output LED 3
Power LED
Output LED 2
Output LED 4
Power contact
+24 V
Power contact 0 V
Output 1-
Output 3-
LED supply+
LED supply-
Output 2-
Output 4-
LED supply+
LED supply-
Top view 
Contact assembly 
EL2564 | EtherCAT Terminal, 4-channel LED output, 5…48 V DC, 4 A, RGBW

Common anode LED connection

EL2564 | EtherCAT Terminal, 4-channel LED output, 5…48 V DC, 4 A, RGBW

EL2564 | EtherCAT Terminal, 4-channel LED output, 5…48 V DC, 4 A, RGBW

EL2564 | EtherCAT Terminal, 4-channel LED output, 5…48 V DC, 4 A, RGBW

Common anode LED connection

The EL2564 digital output terminal controls LEDs with integrated series resistor via an adjustable (ground-switching) PWM signal. Common anode RGBW LEDs can be controlled with the four channels. But also the operation with four LEDs of the same color is possible with the terminal. The terminal has a flexible input voltage of 5…48 V DC. The output voltage corresponds to the input voltage. For the operation of multicolor LEDs the color portion per channel is adjustable. Thus any color mix can be realized. In addition to the color mixing per channel, the adjustment of the total brightness over all channels is also possible. Another parameter that can be adjusted is the frequency. By setting the frequency in a range of 1…16,000 Hz, stroboscopic effects can be avoided. Furthermore, visible flashes can be realized by the low frequencies.

 

Special features:

  • flexible input voltage 5…48 V DC
  • adjustable color component per channel with multicolor LEDs (adjustment of the duty cycle)
  • adjustable total brightness across all channels
  • adjustable frequency 1…16.000 Hz, for the avoidance of stroboscopic effects and the realization of visible flashes at low frequencies

 

Recommended uses:

  • the EL2564 is the right choice for simple continuous light applications with RGBW LEDs in voltage mode
  • the 1st generation EL2595 LED terminal is often sufficient for simple lighting tasks
  • the EL2596 and EL2596-0010 are its successors with a greatly increased performance and are thus suitable for applications where there is a demand for high-precision control

Product status:

Product announcement | estimated market release 3rd quarter 2021

Product information

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2021 - Terms of Use