DetachFixClose

EL2535-0103 | EtherCAT Terminal, 2-channel PWM output, 12…48 V DC, 3 A, current-controlled

EL2535-0103 | EtherCAT Terminal, 2-channel PWM output, 12…48 V DC, 3 A, current-controlled

EL2535-0103 | EtherCAT Terminal, 2-channel PWM output, 12…48 V DC, 3 A, current-controlled

E-bus Run LED
Enable A LED
Warning A
Error A LED
Power LED
Enable B LED
Warning B
Error B LED
Power contact
+24 V
Power contact 0 V
A1
B1
GNDA
+24/48 V
A2
B2
GNDB
GND
Top view 
Contact assembly 
EL2535-0103 | EtherCAT Terminal, 2-channel PWM output, 12…48 V DC, 3 A, current-controlled

EL2535-0103 | EtherCAT Terminal, 2-channel PWM output, 12…48 V DC, 3 A, current-controlled

The EL2535-xxxx output terminals control the output current through pulse width control of the supply voltage. They are electrically isolated from the E-bus. The current values (0 to maximum output current) are specified by the automation device through a 16-bit value. The output stages are protected against overload and short circuit. Each EtherCAT Terminal contains two channels whose signal state is indicated by LEDs. The light emitting diodes simplify local diagnosis by displaying typical load and wiring faults.

 

Special features:

  • 2 PWM outputs with push-pull output stage
  • Suitable for inductive loads > 1 mH
  • 3.5 A max. output current per channel at 12…48 V DC rated voltage

Product status:

Regular delivery

Product information

Loading content ...

Loading content ...

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2021 - Terms of Use