KM2652 | Bus Terminal module, 2-channel digital output, 230 V AC, 6 A, manual/automatic operation
(output 1)
(output 2)
KM2652 | Bus Terminal module, 2-channel digital output, 230 V AC, 6 A, manual/automatic operation
The digital KM2652 output terminal has two independent relay change-over contacts, which can be used for switching mains current consumers. For each channel a switch enables selection between automatic, manual on, manual off. In automatic mode the logical state of an output bit switches the relay. For manual mode a 24 V supply is required for the Bus Coupler. The output state as well as the setting of the switch can be read by the controller.
Product status:
regular delivery
Product information
| Technical data | KM2652 |
|---|---|
| Number of outputs | 2 x change-over |
| Nominal voltage | 230 V AC (max. switching voltage 250 V AC) |
| Switching capacity | max. 1.5 kVA |
| Switching voltage max. | 250 V AC |
| Load type | resistive, inductive, lamp load |
| Max. output current | 6 A per channel |
| Switching current | 6 A AC/4 A DC at 30 V DC |
| Minimum permitted load | 100 mA at 12 V |
| Lamp test, electronic ballast | max. 10 A starting current |
| Current consumption power contacts | – |
| Current consumption K-bus | typ. 130 mA |
| Contact material | AgSnO2 |
| Bit width in the process image | 4 inputs (status hand, auto, relay ON/OFF), 2 outputs |
| Operating cycles | 106 |
| Operating cycles mech. (min.) | 1 x 106 |
| Operating cycles electr. (min.) | 1 x 105 (3 A/250 V AC) |
| Configuration | no address or configuration setting |
| Special features | manual/automatic operation, switch setting readable |
| Weight | approx. 110 g |
| Operating temperature | 0…55°C |
| Storage temperature | -25…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE |
| Housing data | KL-24 |
|---|---|
| Design form | compact terminal housing with signal LEDs |
| Material | polycarbonate |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | – |
| Wiring | specific push-in connection |
| Dimensions (W x H x D) | 24 mm x 100 mm x 52 mm |
Loading content ...
| Material compliance | KM2652 |
|---|---|
| REACH SVHC | no |
| POP | compliant |
| RoHS | compliant with exemption |
| RoHS exemption | 7c-I: Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors |
| China-RoHS | www.beckhoff.com/china-rohs-io |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
Loading content ...
© Beckhoff Automation 2026 - Terms of Use