IE2512 | Extension Box, 2-channel PWM output, 24 V DC, 2.5 A, M12

IE2512, M12, screw type

IE2512, M12, screw type

IP-Link interface

M12 I/O connection sockets

Signal status display

Labeling areas

Power supply status display:

Box supply (US)

Auxiliary voltage (UP)

Power supply feed

Power supply downstream

1 | + 24 V DC US
2 | Up/Down
3 | GND
4 | Output
5 | n.c.

1 | +24 V DC US
2 | +24 V DC UP
3 | GND
4 | GND



Top view 

I/O connection 

Connector assignment 
IE2512, M12, screw type

IE2512, M12, screw type

The outputs of the IE2512 module provide a pulse width modulated version of a binary signal. The keying ratio is prescribed by a 10 bit value from the automation unit. The output is protected against overload and short circuit. In addition to the PWM operating mode, the outputs can also be frequency modulated or used to control stepper motors with specified pulses and direction. The module contains two channels that indicate their state by means of light emitting diodes. The LEDs are driven in time with the outputs and show the keying ratio by their brightness.

Product status:

Regular delivery

Product information

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2022 - Terms of Use