FC1100 | EtherCAT slave card, 1 channel, PCI™
FC1100 | EtherCAT slave card, 1 channel, PCI™
The FC1100 PCI™ EtherCAT card can be used to integrate a PC as a slave in an EtherCAT network. The card has an EtherCAT channel with two ports (IN/OUT) and can be used in three ways:
- Under TwinCAT it is simply recognized as an EtherCAT slave and can easily be configured with the required process data. Distributed clocks are supported, and the task is readjusted.
- Users can create their own application (program) based on the Beckhoff EtherCAT slave stack code ET9300 and access the card. Real-time capability is limited in this case.
- Access to the card can be entirely independent; a dll is available from Beckhoff for operation under Windows.
If the requirement for EtherCAT data exchange between systems arises, functionally similar devices such as the EL6695 bridge terminal or the B110 interface of the CX2/5xxx Embedded PC should be considered in addition to the FC11xx cards.
Product status:
regular delivery
Product information
| Technical data | FC1100 |
|---|---|
| Fieldbus | EtherCAT (direct mode) |
| PC interface | PCI™ |
| Number of EtherCAT ports | 2 x RJ45, EtherCAT IN/OUT |
| Transmission rate | 100 Mbit/s |
| EtherCAT Slave Controller | ET1100 |
| RAM | 8 kbytes |
| SYNC manager | 8 |
| FMMUs | 8 |
| Cable length | up to 100 m |
| Hardware diagnostics | 2 LEDs per channel, activity, link |
| Driver | TwinCAT driver for EtherCAT, support in the EtherCAT Slave Stack Code ET9300 |
| Dimensions (W x H x D) | single slot, approx. 65 mm x 125 mm |
| Operating temperature | 0…55°C |
Loading content ...
| Material compliance | FC1100 |
|---|---|
| REACH SVHC | no |
| POP | compliant |
| RoHS | compliant with exemption |
| RoHS exemption | 7c-I: Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors |
| China-RoHS | www.beckhoff.com/china-rohs-io |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
Loading content ...
© Beckhoff Automation 2026 - Terms of Use