EK1121-0010 | 1-port EtherCAT junction, Extended Distance
EK1121-0010 | 1-port EtherCAT junction, Extended Distance
The EK1121-0010 1-port EtherCAT junction can be used in an EtherCAT Terminal segment at any desired position between the EtherCAT Terminals and enables configuration of EtherCAT star topologies. A modular EtherCAT star hub can be realized by using several EK1121-0010 units in a station.
Special features:
- Connection technology: 1 x RJ45 socket
- Connection lengths: up to 300 m
- Can be used for configuring an EtherCAT star topology
The EK1121-0010 has an RJ45 socket that enables connection of an Ethernet cable with RJ45 connector and establishes a connection to a further EtherCAT segment or to individual EtherCAT devices. With the Extended Distance connection, distances of up to 300 m can be reached between two Extended Distance devices. If only one connection is configured for Extended Distance, the maximum distance between the stations is 100 m. The EK1121-0010 supports coupling and uncoupling of EtherCAT segments during operation (Hot Connect).
Product status:
regular delivery
Product information
| Technical data | EK1121-0010 |
|---|---|
| Task within EtherCAT system | coupling of 100BASE-TX EtherCAT networks |
| Transmission medium | Ethernet/EtherCAT cable (copper, min. Cat.5, 4-wire, AWG22), shielded |
| Distance between stations | max. 300 m |
| Protocol | EtherCAT |
| Propagation delay | approx. 1 µs |
| Transmission rate | 100 Mbit/s |
| Configuration | not required |
| Bus interface | 1 x RJ45 |
| Power supply | from E-bus |
| Current consumption | typ. 160 mA |
| Weight | approx. 65 g |
| Operating temperature | 0…55°C |
| Storage temperature | -25…+85°C |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE, UL |
| Housing data | EL-24 |
|---|---|
| Design form | compact terminal housing with signal LEDs |
| Material | polycarbonate |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | – |
| Wiring | specific push-in connection |
| Dimensions (W x H x D) | 24 mm x 100 mm x 52 mm |
Loading content ...
| Material compliance | EK1121-0010 |
|---|---|
| REACH SVHC | no |
| POP | compliant |
| RoHS | compliant with exemption |
| RoHS exemption | 7c-I: Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors |
| China-RoHS | www.beckhoff.com/china-rohs-io |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
Loading content ...
Loading content ...
© Beckhoff Automation 2026 - Terms of Use