EJ5042-0010 | EtherCAT plug-in module, 2-channel encoder interface, BiSS-C, without sensor supply
EJ5042-0010 | EtherCAT plug-in module, 2-channel encoder interface, BiSS-C, without sensor supply
EJ5042-0010 | EtherCAT plug-in module, 2-channel encoder interface, BiSS-C, without sensor supply
EJ5042-0010 | EtherCAT plug-in module, 2-channel encoder interface, BiSS-C, without sensor supply
EtherCAT plug-in modules of the EJ series
The EJ5042-0010 EtherCAT plug-in module is a BiSS-C master and enables the direct connection of an absolute encoder with BiSS-C or SSI interface. Both singleturn and multiturn encoders are supported.
The extensive parameterization allows optimum adaptation to different encoder types.
Special features:
- unidirectional BiSS-C communication
- parameterization per channel possible
- baud rate up to max. 10 MHz
- separate evaluation of the error and warning bit in the process data
- position value output with up to 64 bits (depending on the encoder resolution)
- also usable as SSI master
Via the distributed clocks function, the position value is read out exactly synchronously with other processes. If the distributed clocks function is deactivated, the EJ5042-0010 clocks synchronize with the EtherCAT cycle.
The use of encoder profiles enables simple and fast linking of process data for motion control applications.
Product status:
regular delivery
Product information
| Technical data | EJ5042-0010 |
|---|---|
| Technology | BiSS-C interface, unidirectional |
| Encoder connection | binary input: D+, D-, binary output: C+, C- |
| Encoder operating voltage | external e.g. by EJ9505 |
| Supply voltage electronics | via UP contacts |
| Current consumption E-bus | typ. 180 mA |
| Current consumption from UP | typ. 30 mA + load |
| Resolution | max. 64 bit position, 2 bit status, 8 bit CRC |
| Data transfer rates | variable up to 10 MHz, 10 MHz default |
| Distributed clocks | yes |
| Electrical isolation | 500 V (E-bus/field potential) |
| Special features | adjustable baud rate, data length, two status bits (error and warning) can be evaluated separately |
| Weight | approx. 30 g |
| Operating/storage temperature | 0…+55 °C/-25…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/see documentation |
| Approvals/markings | CE |
| Housing data | EJ-12-16pin |
|---|---|
| Design form | EtherCAT I/O plug-in module |
| Material | polycarbonate |
| Installation | on signal distribution board |
| Mechanical coding | EJ plug-in module: signal-specific coding pins on the housing, signal distribution board: holes in the printed circuit board |
| Locking | latching lug in circuit board cut-out |
| Connection method | field wiring: application-specific wiring level on the signal distribution board,
EJ plug-in module: 2 x 20-pin socket strip |
| Dimensions (W x H x D) | 12 mm x 66 mm x 55 mm |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2024 - Terms of Use