DétacherÉpinglerFermer

Siège social Suisse
Beckhoff Automation AG

Rheinweg 7
8200 Schaffhausen, Suisse

+41 52 633 40 40
info@beckhoff.ch
www.beckhoff.ch

Technical Support Schaffhausen Switzerland (German)

+41 52 633 40 40
support@beckhoff.ch
Formulaire de contact

Technical Support Arbon Switzerland (German)

+41 71 447 10 80
support@beckhoff.ch

Technical Support Lyssach Switzerland (German)

+41 34 447 44 88
support@beckhoff.ch

Technical Support Yverdon (French)

+41 24 447 27 00
support@beckhoff.ch

Technical Support Switzerland (Italian)

+41 91 792 24 40
support@beckhoff.ch

ELX5151-0090 | 1-channel incremental encoder interface NAMUR, 32 bit, Ex i, TwinSAFE SC

ELX5151-0090 | 1-channel incremental encoder interface NAMUR, 32 bit, Ex i, TwinSAFE SC

ELX5151-0090 | 1-channel incremental encoder interface NAMUR, 32 bit, Ex i, TwinSAFE SC

Run LED
Signal LED A
Error LED A
Signal LED B
Error LED B
Power contact
+24 V EX
Power contact
0 V EX
A
UV1
B
UV2
Top view 
ELX5151-0090 | 1-channel incremental encoder interface NAMUR, 32 bit, Ex i, TwinSAFE SC

ELX5151-0090 | 1-channel incremental encoder interface NAMUR, 32 bit, Ex i, TwinSAFE SC

TwinSAFE SC: Making standard signals usable for safety tasks

TwinSAFE SC: Making standard signals usable for safety tasks

The ELX5151-0090 EtherCAT Terminal allows the direct connection of an intrinsically safe incremental encoder from Zone 0/20 and 1/21 hazardous areas. The terminal supplies the encoder with 8.2 V DC and evaluates a diagnostic-capable NAMUR signal according to IEC 60947-5-6. In this way, a wire breakage or short circuit can be detected in addition to the switching state. The ELX5151-0090 can also be used as an up/down counter and allows switching between 16- and 32-bit counting.

With the aid of the TwinSAFE SC technology (TwinSAFE Single Channel) it is possible to make use of standard signals for safety tasks in any network or fieldbus. To do this, EtherCAT I/Os from the areas of analog input, position measurement or communication (4…20 mA, incremental encoder, IO-Link, etc.) are extended by the TwinSAFE SC function. The properties typical for the signals and the standard functions of the I/O components are retained. TwinSAFE SC I/Os differ optically from standard I/Os by a yellow stripe on the front of the housing.

The TwinSAFE SC technology enables communication via a TwinSAFE protocol. These connections can be distinguished from the usual secure communication via Safety over EtherCAT.

The data from the TwinSAFE SC components is fed via a TwinSAFE protocol to the TwinSAFE Logic, where it can be used in the context of safety-relevant applications. Detailed examples confirmed/calculated by the TÜV SÜD for the correct application of the TwinSAFE SC components and the respective normative classifications can be found in the TwinSAFE application manual.

Product status:

Regular delivery

Product information

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2021 - Terms of Use