Image similar, may contain optional accessories
EL2722 | EtherCAT Terminal, 2-channel TRIAC output, 12…230 V AC, 1 A
Signal 1
Signal 2
Power contact
230 V AC
230 V AC
Power contact
N
N
Power contact
⏚
⏚
Output 1
Output 2
230 V
N
⏚
EL2722 | EtherCAT Terminal, 2-channel TRIAC output, 12…230 V AC, 1 A
The EL2722 output terminal uses a power switch to control mains voltage from 12 V to 230 V AC. The switching element is a TRIAC, which is connected to the power contact potential. As a semiconductor switch, it is not subject to wear. The steady load capacity of a digital output is 1 A. The EtherCAT Terminal has two mutually locked outputs, whose signal state is indicated by LEDs.
Special features:
- TRIAC output
- 2 x make contacts with mutual interlocking
- connection of resistive and inductive loads from 12 to 230 V AC
- suitable for conventional blind motors
Product status:
regular delivery
Product information
| Technical data | EL2722 |
|---|---|
| Connection technology | TRIAC output, 2-wire |
| Number of outputs | 2 x make contacts, mutually locked |
| Rated load voltage | 12…230 V AC |
| Load type | resistive, inductive |
| Distributed clocks | – |
| Max. output current | 1 A (leakage current: typ. 0.8 mA, max. 1.5 mA) per channel |
| Switching times | in zero crossing, 0.1…10 ms |
| Rotating field frequency | 47…63 Hz |
| Surge voltage protection | > 275 V |
| Peak current | 40 A (16 ms), 1.5 A (30 s) |
| Standby current | 0.6 mA |
| Leakage current (OFF state) | typ. 0.8 mA, max. 1.5 mA |
| Switch-on time | 0.1…10 ms, zero crossing |
| Switch-off time | T/2 |
| Residual voltage | max. 1.5 V (60 mA…1 A), 150 Ω (< 60 mA) |
| Current consumption E-bus | typ. 120 mA |
| Current consumption power contacts | – |
| Bit width in the process image | 2 outputs |
| Configuration | no address or configuration setting |
| Electrical isolation | 500 V (E-bus/field voltage), 3750 V AC (1 min.) |
| Special features | suitable for conventional blind motors |
| Weight | approx. 55 g |
| Operating temperature | 0…55°C |
| Storage temperature | -25…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Pluggable wiring level | for all ESxxxx terminals |
| Approvals/markings | CE |
| Housing data | EL-12-8pin | ES-12-8pin |
|---|---|---|
| Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
| Material | polycarbonate | |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
| Side by side mounting by means of | double slot and key connection | |
| Marking | labeling of the BZxxxx series | |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver | |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² | s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 | s*: AWG28…16, st*: AWG28…16, f*: AWG26…16 |
| Stripping length | 8…9 mm | 9…10 mm |
| Current load power contacts | Imax: 10 A | |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm | |
*s: solid wire; st: stranded wire; f: with ferrule
| Ordering information | |
|---|---|
| EL2722 | EtherCAT Terminal, 2-channel TRIAC output, 12…230 V AC, 1 A |
| ES2722 | EtherCAT Terminal, 2-channel TRIAC output, 12…230 V AC, 1 A, pluggable wiring level |
Loading content ...
| Material compliance | EL2722 |
|---|---|
| REACH SVHC | no |
| POP | compliant |
| RoHS | compliant with exemption |
| RoHS exemption | 7c-I: Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors |
| China-RoHS | www.beckhoff.com/china-rohs-io |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
Loading content ...
Loading content ...
© Beckhoff Automation 2026 - Terms of Use