KL9182 | Potential distribution terminal, 2 x 8 potentials
+24 V
KL9182 | Potential distribution terminal, 2 x 8 potentials
The potential distribution terminal KL9182 provides 16 terminal points for potential distribution and enables the voltage to be picked up without further bus terminal blocks or wiring. The power contacts are fed through to the next terminal without connecting to the terminal points.
The HD Bus Terminals (High Density) with increased packing density feature 16 connection points in the housing of a 12 mm Bus Terminal. The conductors can be connected without tools in the case of solid wires using a direct plug-in technique.
Product status:
regular delivery
Product information
| Technical data | KL9182 |
|---|---|
| Number of separate potentials | 8 |
| Terminal points per potential | 2 |
| Current load | max. 10 A (per terminal point) |
| Power LED | – |
| Defect LED | – |
| Current consumption K-bus | – |
| Nominal voltage | ≤ 60 V AC/DC |
| Electrical isolation | 500 V (K-bus/field potential) |
| PE contact | – |
| Shield connection | – |
| K-bus, looped through | yes |
| Power contacts_looped_through | yes (2 power contacts) |
| Bit width in the process image | – |
| Electrical connection to DIN rail | – |
| Electrical connection to power contacts | – |
| Configuration | no address or configuration setting |
| Special features | 8 x 2-way bridges |
| Weight | approx. 60 g |
| Operating/storage temperature | 0…+55 °C/-25…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE, UL |
| Housing data | HD housing |
|---|---|
| Design form | HD (High Density) housing with signal LEDs |
| Material | polycarbonate |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | – |
| Wiring | solid conductors (e): direct plug-in technique; fine-stranded conductors (f) and ferrule (a): spring actuation by screwdriver |
| Connection cross-section | s*: 0.08…1.5 mm², st*: 0.25…1.5 mm², f*: 0.14…0.75 mm² |
| Stripping length | 8…9 mm |
*s: solid wire; st: stranded wire; f: with ferrule
© Beckhoff Automation 2023 - Terms of Use