KL9560 | Power supply unit terminal 24 V DC/24 V DC, 0.1 A
Power LED
Power LED
Power contact
Power contact
Power contact
+24 V
Access to 24 V
Access to 0 V
PE
0 V
PE
KL9560 | Power supply unit terminal 24 V DC/24 V DC, 0.1 A
The KL9560 power supply unit terminal generates an electrically isolated output voltage from the 24 V DC input voltage, which can be accessed at the terminal. The following Bus Terminals are also supplied with this voltage via the power contacts. The power LEDs indicate the operating state of the terminal. The input voltage and the output voltage of 500 V are electrically isolated.
Product status:
regular delivery
Product information
| Technical data | KL9560 |
|---|---|
| Input voltage | 24 V DC (-15 %/+20 %) |
| Output voltage | 24 V DC (-15 %/+5 %) |
| Output current | ≤ 0.1 A |
| Short-circuit current | approx. 0.15 A |
| Efficiency | approx. 85 % |
| Diagnostics in the process image | yes |
| Short-circuit proof | yes, automatic restart |
| Insulation voltage input/output | 500 V AC permanent load |
| Insulation voltage | 1,500 V AC constant load field/K-bus |
| Residual ripple | no data |
| Special features | analog voltage with electrical isolation |
| Weight | approx. 65 g |
| Operating/storage temperature | 0…+55 °C/-25…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Pluggable wiring | for all KSxxxx Bus Terminals |
| Approvals/markings | CE, UL, ATEX, IECEx, DNV GL |
| Ex marking | ATEX: II 3 G Ex nA IIC T4 Gc IECEx: Ex ec IIC T4 Gc |
| Housing data | KL-12-8pin | KS-12-8pin |
|---|---|---|
| Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
| Material | polycarbonate | |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm | |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
| Side by side mounting by means of | double slot and key connection | |
| Marking | labeling of the BZxxx series | |
| Wiring | solid conductor (e), flexible conductor (f) and ferrule (a): spring actuation by screwdriver | |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² | s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG 28…14, st*: AWG 28…14, f*: AWG 26…16 | s*: AWG 28…16, st*: AWG 28…16, f*: AWG 26…16 |
| Stripping length | 8…9 mm | 9…10 mm |
| Current load power contacts | Imax: 10 A | |
*s: solid wire; st: stranded wire; f: with ferrule
| Ordering information | |
|---|---|
| KL9560 | Power supply unit terminal 24 V DC/24 V DC, 0.1 A |
| KS9560 | Power supply unit terminal 24 V DC/24 V DC, 0.1 A, pluggable wiring |
© Beckhoff Automation 2023 - Terms of Use