ZK4500-8002-xxxx | Motor connection cable 1 mm² with itec® plug, fixed installation
Contact assembly
ZK4500-8002-xxxx | Motor connection cable 1 mm² with itec® plug, fixed installation
Contact assembly
cables for fixed installation,
min. bending radius = 50 mm (5 x OD),
(4 x 1.0 mm² + (2 x 0.5 mm²) + (2 x AWG26)), max. cable length (in total) 25 m, vertical 5 m,
The cable is UL and CSA listed.
suitable for:
- AM801x
- AM802x
- AM803x
- AM853x
- AX5000 1.5…6 A
Product status:
regular delivery
Product information
| Technical data | Head A |
|---|---|
| Installation size | itec® (Series 915) |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | Power: 3+PE, Signal: 5 |
| Mating cycles | 500 |
| Wire termination | crimp connection |
| Technical data | Head B |
|---|---|
| Installation size | Pitch dimension 7.62 mm |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | 4-pin |
| Mating cycles | 25 |
| Wire termination | Clamping yoke connection |
| Max. wire cross-section | AWG24…AWG8 (0.2 mm²…10 mm²) |
| Technical data | Head C |
|---|---|
| Installation size | Pitch dimension 3.50 mm |
| Connector type | plug |
| Contact type | female |
| Number of positions (face) | 5-pin |
| Mating cycles | 25 |
| Wire termination | Clamping yoke connection |
| Max. wire cross-section | AWG28…AWG14 (0.2 mm²…1.5 mm²) |
| Technical data | Cable by meter |
|---|---|
| Operating voltage | max. 1000 V AC (UL) |
| Cross-section (power) | 1.00 mm² (approx. AWG18) |
| Cross-section (signal) | AWG26 (approx. 0.14 mm²) |
| Use | fixed installation |
| Material jacket | PVC (polyvinyl chloride) |
| Outer cable diameter | 10.0 mm ± 0.3 mm (0.3937" ± 0.0118") |
| Min. bending radius, fixed installation | 4 x outer cable diameter |
| Jacket color | orange |
For further technical details, please refer to the data sheet.
| A1 | 44.00 mm |
| A2 | 19.00 mm |
| B1 | approx. 45.00 mm |
| B2 | approx. 45.00 mm |
| C1 | 19.00 mm |
| C2 | 25.00 mm |
| Ordering information | Length |
|---|---|
| ZK4500-8002-0010 | 1.00 m |
| ZK4500-8002-0015 | 1.50 m |
| ZK4500-8002-0020 | 2.00 m |
| ZK4500-8002-0030 | 3.00 m |
| ZK4500-8002-0040 | 4.00 m |
| ZK4500-8002-0050 | 5.00 m |
| ZK4500-8002-0060 | 6.00 m |
| ZK4500-8002-0070 | 7.00 m |
| ZK4500-8002-0080 | 8.00 m |
| ZK4500-8002-0100 | 10.00 m |
| ZK4500-8002-0110 | 11.00 m |
| ZK4500-8002-0130 | 13.00 m |
| ZK4500-8002-0150 | 15.00 m |
| ZK4500-8002-0170 | 17.00 m |
| ZK4500-8002-0200 | 20.00 m |
| ZK4500-8002-0250 | 25.00 m |
Loading content ...
| Material compliance | ZK4500-8002-xxxx |
|---|---|
| CAS No. | no |
| REACH SVHC | no |
| POP | compliant |
| RoHS | compliant with exemption |
| China-RoHS | www.beckhoff.com/china-rohs-io |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
Loading content ...
© Beckhoff Automation 2026 - Terms of Use