DetachFixClose

Headquarters South Africa
Beckhoff Automation (Pty) Ltd

7 Ateljee Street
Randpark Ridge, Randburg
Gauteng
2169, South Africa

+27 11 795 2898
info@beckhoff.co.za
www.beckhoff.com/en-za/

KL2502 | Bus Terminal, 2-channel PWM output, 24 V DC, 0.1 A

Image similar, may contain optional accessories
KL2502 | Bus Terminal, 2-channel PWM output, 24 V DC, 0.1 A

KL2502 | Bus Terminal, 2-channel PWM output, 24 V DC, 0.1 A

Signal LED 1
Signal LED 2
Power contact
+24 V
Power contact 0 V
Power contact PE
Output 1
Output 2
+24 V
0 V
PE
Top view 
Contact assembly 
KL2502 | Bus Terminal, 2-channel PWM output, 24 V DC, 0.1 A

KL2502 | Bus Terminal, 2-channel PWM output, 24 V DC, 0.1 A

The KL2502 output terminal modulates the pulse width of a binary 24 V DC signal and outputs it electrically isolated from the K-bus. The mark/space ratio is prescribed by a 16 bit value from the automation device. The output stage is protected against overload and short-circuit. The Bus Terminal has two channels, whose signal state is displayed by light emitting diodes. The LEDs are driven in time with the outputs, and show the duty factor by their brightness.

In addition to the KL2502 there is a 5 V DC variant (KL2502-3020) with a PWM clock frequency of up to 30 kHz.

Product status:

regular delivery

Product information

Technical dataKL2502
Number of outputs2
Nominal voltage24 V DC (-15%/+20%)
Load typeohmic
Max. output current0.1 A (1 A driver component) per channel
PWM clock frequency1 Hz…20 kHz, 250 Hz default
Duty factor0…100% (TON > 750 ns, TOFF > 500 ns)
Resolutionmax. 10 bit
Electrical isolation500 V (K-bus/field potential)
Current consumption power contactstyp. 10 mA + load
Current consumption K-bustyp. 18 mA
Bit width in the process image48 inputs/outputs: 2 x 16 bit data, 2 x 8 bit control/status
Configurationno address setting, configuration via Bus Coupler or controller
Weightapprox. 50 g
Operating/storage temperature0…+55°C/-25…+85°C
Relative humidity95%, no condensation
Vibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.IP20/variable
Pluggable wiringfor all KSxxxx Bus Terminals
Approvals/markingsCE, UL, ATEX, IECEx, cFMus
Ex markingATEX:
II 3 G Ex ec IIC T4 Gc
IECEx:
Ex ec IIC T4 Gc
cFMus:
Class I, Division 2, Groups A, B, C, D
Class I, Zone 2, AEx ec IIC T4 Gc
Housing dataKL-12-8pinKS-12-8pin
Design formcompact terminal housing with signal LEDsterminal housing with pluggable wiring level
Materialpolycarbonate
Dimensions (W x H x D)12 mm x 100 mm x 68 mm
Installationon 35 mm DIN rail, conforming to EN 60715 with lock
Side by side mounting by means ofdouble slot and key connection
Markinglabeling of the BZxxx series
Wiringsolid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver
Connection cross-sections*: 0.08…2.5 mm²,
st*: 0.08…2.5 mm²,
f*: 0.14…1.5 mm²
s*: 0.08…1.5 mm²,
st*: 0.08…1.5 mm²,
f*: 0.14…1.5 mm²
Connection cross-section AWGs*: AWG28…14,
st*: AWG28…14,
f*: AWG26…16
s*: AWG28…16,
st*: AWG28…16,
f*: AWG26…16
Stripping length8…9 mm9…10 mm
Current load power contactsImax: 10 A

*s: solid wire; st: stranded wire; f: with ferrule

Ordering information
KL2502Bus Terminal, 2-channel PWM output, 24 V DC, 0.1 A
KS2502Bus Terminal, 2-channel PWM output, 24 V DC, 0.1 A, pluggable wiring
KL2502-3020Bus Terminal, 2-channel PWM output, 5 V DC, 30 kHz

Loading content ...

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2024 - Terms of Use