EemaldaKinnitaSulge

EL9562 | EtherCAT Terminal, power supply, 24 V DC, 2 x output 24 V DC, 0.2 A, electrically isolatedNew

EL9562 | EtherCAT Terminal, power supply, 24 V DC, 2 x output 24 V DC, 0.2 A, electrically isolated

EL9562 | EtherCAT Terminal, power supply, 24 V DC, 2 x output 24 V DC, 0.2 A, electrically isolated

Power LED
Run LED
Power LED
Power contact
Power contact
Power contact
+24 V
Access to 24 V
Access to 0 V
Top view 
Contact assembly 
EL9562 | EtherCAT Terminal, power supply, 24 V DC, 2 x output 24 V DC, 0.2 A, electrically isolated

EL9562 | EtherCAT Terminal, power supply, 24 V DC, 2 x output 24 V DC, 0.2 A, electrically isolated

The EL9562 power supply terminal generates two electrically isolated output voltages from the 24 V DC input voltage. The output voltages can be tapped at the terminal with a current of 0.2 A. The power contacts are looped through. The power LEDs indicate the operating status of the terminal. An electrical isolation of 500 V exists between the input voltage and the output voltages. The two output voltages are also electrically isolated from each other. By connecting both voltages a symmetrical DC voltage can be generated.

Product status:

product announcement | estimated market release 2nd quarter 2024

Product information

Technical dataEL9562
Technologypower supply terminal
Short-circuit proofyes
Input voltage24 V DC (-15%/+20%)
Output voltage24 V DC (-15%/+20%)
Output current2 x ≤ 0,2 A
Current consumption E-bus40 mA
Insulation voltage1,500 V AC constant load field side/E-bus
Insulation voltage input/output500 V AC permanent load (field side)
Special featuresautomatic restart after short circuit, diagnostics UIN/UOUT
Weightapprox. 55 g
Operating/storage temperature0…+55°C/-25…+85°C
Relative humidity95%, no condensation
EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4
Vibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27
Protect. rating/installation pos.IP20/variable
Approvals/markingsCE
Housing dataEL-12-8pin
Design formcompact terminal housing with signal LEDs
Materialpolycarbonate
Dimensions (W x H x D)12 mm x 100 mm x 68 mm
Installationon 35 mm DIN rail, conforming to EN 60715 with lock
Side by side mounting by means ofdouble slot and key connection
Markinglabeling of the BZxxx series
Wiringsolid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver
Connection cross-sections*: 0.08…2.5 mm²,
st*: 0.08…2.5 mm²,
f*: 0.14…1.5 mm²
Connection cross-section AWGs*: AWG28…14,
st*: AWG28…14,
f*: AWG26…16
Stripping length8…9 mm
Current load power contactsImax: 10 A

*s: solid wire; st: stranded wire; f: with ferrule

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2024 - Terms of Use