IP5209-B318 | Fieldbus Box, 1-channel encoder interface, PROFIBUS, SinCos, 1 Vpp, M23, integrated T-connector (service phase)
on the fieldbus)
connection
1 | B
2 | +5 V DC sensor
3 | R
4 | R
5 | A
6 | A
7 | n.c.
8 | B
9 | n.c.
10 | GNDS
11 | GNDS
12 | +5 V DC sensor
2 | +24 V DC UP
3 | GNDS
4 | GNDP
IP5209-B318 | Fieldbus Box, 1-channel encoder interface, PROFIBUS, SinCos, 1 Vpp, M23, integrated T-connector (service phase)
The SinCos module IP5209-Bxxx serves as interface for the direct connection of a measuring sensor, for example a measuring probe with sinusoidal voltage output 1 VPP to the higher-level fieldbus. In contrast to the standard version, instead of a voltage input the special IP5209-Bxxx-1000 version has a current input for 11 µAPP measuring probes. The measuring signal is processed, interpolated and made available as a 32 bit value. The signal period resolution is 10 bits, i.e. 1024 steps. The reference mark is also stored in a 32 bit value. The current count and the reference mark value can be read. The cut-off frequency for the measuring signal inputs is 100 kHz.
Product status:
regular delivery
Product information
| Technical data position measurement | IP5209-Bxxx |
|---|---|
| Connection technology | M23 connector with outer thread, 12-pin |
| Number of channels | 1 |
| Nominal voltage | 24 V DC (-15%/+20%) |
| Signal input | 1 VPP |
| Encoder supply | 5 V DC |
| Sensor supply | 5 V DC from control voltage, max. 0.5 A |
| Cut-off frequency | 100 kHz (scanning of the input signals with 500 kHz) |
| Resolution | 10 bit, 1024 steps per period |
| Commands | set count, evaluate reference mark latch, change of direction, frequency control |
| Transmission rate | – |
| Power supply connection | feed: 1 x M8 male socket, 4-pin, a-coded; downstream connection: 1 x M8 female socket, 4-pin, a-coded |
| Current consumption from US (without sensor current) | 130 mA |
| Bit width in the process image | input/output: 2 x 32 bit data, 1 x 8 bit control/status |
| Electrical isolation | depends on the bus system |
| Technical data | IP5209-B318 |
|---|---|
| Configuration | via KS2000 or the controller, DP-V1 extensions are supported |
| Transmission rate | automatic detection up to 12 Mbaud |
| Bus interface | 1 x M12 socket, 5-pin, 1 x M12 plug, 5-pin (tee-connector integrated), B-coded |
| Transmission medium | shielded copper cable, 2 x 0.25 mm² |
| Power supply | control voltage: 24 V DC (-15%/+20%); load voltage: according to I/O type |
| Power supply connection | feed: 1 x M8 male socket, 4-pin, a-coded; downstream connection: 1 x M8 female socket, 4-pin, a-coded |
| Box supply current | 85 mA + current consumption of sensors, max. 0.5 A |
| Auxiliary power current | according to I/O type |
| Electrical isolation | control voltage/fieldbus: no, control voltage/inputs or outputs: according to I/O type |
| Data transfer time | approx. 0.5 ms with 10 stations each with 32 bit input and output |
| Operating temperature | 0…55°C |
| Storage temperature | -25…+85°C |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP65/66/67 (conforms to EN 60529)/variable |
| Approvals/markings | CE, UL |
| Housing data | XXL housing |
|---|---|
| Dimensions (W x H x D) | 30 mm x 210 mm x 26.5 mm |
| Material | PA6 (polyamide) |
| Installation | 2 fixing holes 3.5 mm diameter for M3 |
| Ordering information | |
|---|---|
| IP5209-B318 | Fieldbus Box, 1-channel encoder interface, PROFIBUS, SinCos, 1 Vpp, M23, integrated T-connector (service phase) |
| IP5209-B318-1000 | Fieldbus Box, 1-channel encoder interface, PROFIBUS, SinCos, 11 µApp, M23, integrated T-connector (service phase) |
| Material compliance | IP5209-B318 |
|---|---|
| CAS No. | 7439-92-1, 556-67-2, 115-86-6 |
| REACH SVHC | Lead, Octamethylcyclotetrasiloxane, Triphenyl phosphate |
| REACH Annex XVII | compliant |
| REACH Annex XIV | compliant |
| SCIP No. | 2891ebe2-fbf0-4948-b1db-f7a3a34cb218 |
| POP | compliant |
| RoHS | compliant with exemption |
| RoHS exemption | 6c: Copper alloy with a mass fraction of up to 4% lead, 7c-I: Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors |
| China-RoHS | www.beckhoff.com/china-rohs-io |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
| Material compliance | SCIP | SCIP No. |
|---|---|
| IP5209-B318 | 2891ebe2-fbf0-4948-b1db-f7a3a34cb218 |
| IP5209-B318-1000 | b45fbc9f-ac6b-483c-8018-de7f9758682b |
Loading content ...
© Beckhoff Automation 2026 - Terms of Use