EL6711-0010 | EtherCAT Terminal, 1-channel communication interface, CC-Link, slave
As an EtherCAT slave, the EL6711-0010 CC-Link slave terminal enables data exchange between EtherCAT and CC-Link. The terminal is a slave, both on the EtherCAT and on the CC-Link side, so that an EtherCAT master can exchange data with a CC-Link master via this terminal. All CC-Link-specific settings such as node address, baud rate, data size and many more are parameterized via the EtherCAT master. There is no need for complex configurations on the CC-Link side; no further parameterization via the CC-Link master is required.
|CC-Link slave terminal
|CC-Link slave version 1.1 or 2.0 (parameterizable)
|Number of fieldbus channels
|Data transfer rates
|156 kbaud…10 Mbaud
|1 x open style connector, 5-pin, included
|Max. number of bytes fieldbus
|16 words (version 1.1) or 128 words (version 2.0)
|Current consumption power contacts
|0…+55 °C/-25…+85 °C
|95%, no condensation
|conforms to EN 60068-2-6/EN 60068-2-27
|conforms to EN 61000-6-2/EN 61000-6-4
|Protect. rating/installation pos.
|compact terminal housing with signal LEDs
|Dimensions (W x H x D)
|24 mm x 100 mm x 52 mm
|on 35 mm DIN rail, conforming to EN 60715 with lock
|Side by side mounting by means of
|double slot and key connection
|specific push-in connection
Loading content ...