The SCT1111 mini ring-type CTs can be positioned on a DIN rail by means of snap-on fastening and are thus suitable for measurements in very tight installation spaces, e.g. directly in the sub-distribution unit. Two CTs are attached to the DIN rail, while the third CT is plugged into the fastened CTs. Connection takes place via a removable terminal that enables pre-wiring.
Product status:
regular delivery
Product information
| Technical data | SCT1111-0060 |
|---|---|
| Accuracy class | 1 |
| Primary current | 60 A AC |
| Secondary signal | 1 A |
| Rated power | 0.4 VA |
| Max. diameter round conductor | 7.6 mm |
| Dimensions (W x H x D) | 27.5 mm x 46.5 mm x 19 mm |
| Approvals/markings | CE, cURus |
| Accessories | |
|---|---|
| ZB8201-0110 | Snap-on mounting for SCT1xxx |
| Material compliance | SCT1111-0060 |
|---|---|
| REACH SVHC | no |
| POP | compliant |
| RoHS | compliant without exemption |
| China-RoHS | www.beckhoff.com/china-rohs-io |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2026 - Terms of Use