+24 V EX
0 V EX
ELX3204-0090 | EtherCAT Terminal, 4-channel analog input, temperature, RTD (Pt100), 16 bit, Ex i, TwinSAFE SC
TwinSAFE SC: Making standard signals usable for safety tasks
The ELX3204-0090 analog input terminal allows the direct connection of RTDs located in hazardous areas classified Zone 0/20 or 1/21. The circuitry of the ELX3204-0090 can operate sensors with 2-wire technology. Linearisation is carried out over the entire freely selectable temperature range. By default the terminal is set to Pt100 sensors with 2-wire technology. The ELX3204-0090 terminal indicates signal state and sensor malfunctions (e.g. wire breakage) by means of LEDs.
With the aid of the TwinSAFE SC technology (TwinSAFE Single Channel) it is possible to make use of standard signals for safety tasks in any network or fieldbus. To do this, EtherCAT I/Os from the areas of analog input, position measurement or communication (4…20 mA, incremental encoder, IO-Link, etc.) are extended by the TwinSAFE SC function. The properties typical for the signals and the standard functions of the I/O components are retained. TwinSAFE SC I/Os differ optically from standard I/Os by a yellow stripe on the front of the housing.
The TwinSAFE SC technology enables communication via a TwinSAFE protocol. These connections can be distinguished from the usual secure communication via Safety over EtherCAT.
The data from the TwinSAFE SC components is fed via a TwinSAFE protocol to the TwinSAFE Logic, where it can be used in the context of safety-relevant applications. Detailed examples confirmed/calculated by the TÜV SÜD for the correct application of the TwinSAFE SC components and the respective normative classifications can be found in the TwinSAFE application manual.
|Number of inputs||4 (differential)|
|Power supply||via the E-bus|
|Temperature range||-200…+850 °C (Pt sensors); -60…+250 °C (Ni sensors), for further types and details see documentation|
|Resolution||up to 0.01 °C per digit (preset: 0.1 °C per digit)|
|Measuring current||< 1 mA (depending on sensor and measuring range)|
|Measuring error||< ±0.3 % (relative to full scale value)|
|Internal resistance||typ. ≥ 10 kΩ (differential)|
|Input filter limit frequency||typ. 1 kHz|
|Sensor types||Pt100, Pt200, Pt500, Pt1000, Ni100, Ni120, Ni1000, resistance measurement (10 Ω…4 kΩ), KT(Y) sensors|
|Conversion time||10…3300 ms (adjustable, default: 270 ms)|
|Supply voltage electronics||24 V DC (via power contacts), ELX9560 power supply|
|Current consumption power contacts||typ. 10 mA|
|Current consumption E-bus||typ. 70 mA|
|Special features||limit value monitoring, digital filter and characteristic curve linearisation integrated, connection method freely configurable, TwinSAFE SC|
|Weight||approx. 60 g|
|Operating/storage temperature||-25…+60 °C/-40…+85 °C|
|Relative humidity||95 %, no condensation|
|Vibration/shock resistance||conforms to EN 60068-2-6/EN 60068-2-27|
|EMC immunity/emission||conforms to EN 61000-6-2/EN 61000-6-4|
|Protect. class/installation pos.||IP 20/see documentation|
|Approvals/markings||CE, UL, ATEX, IECEx, cFMus|
II 3(1)G Ex ec [ia Ga] IIC T4 Gc
II (1)D [Ex ia Da] IIIC
I (M1) [Ex ia Ma] I
Ex ec [ia Ga] IIC T4 Gc
[Ex ia Da] IIIC
[Ex ia Ma] I
AIS Class I, II, III, Division 1, Groups A thru G
Class I, Division 2, Groups A, B, C, D
Class I, Zone 2, AEx ec [ia Ga] IIC T4 Gc
[AEx ia Da] IIIC T4
|Design form||compact terminal housing with signal LEDs|
|Dimensions (W x H x D)||12 mm x 100 mm x 68 mm|
|Installation||on 35 mm DIN rail, conforming to EN 60715 with lock|
|Side by side mounting by means of||double slot and key connection|
|Marking||Labeling of the BZxxx series|
|Wiring||solid conductor (e), flexible conductor (f) and ferrule (a): spring actuation by screwdriver|
|Connection cross-section||s*: 0.08…2.5 mm², |
st*: 0.08…2.5 mm²,
f*: 0.14…1.5 mm²
|Connection cross-section AWG||s*: AWG 28…14, |
st*: AWG 28…14,
f*: AWG 26…16
|Stripping length||8…9 mm|
|Power contacts||2 blade/spring contacts|
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
Loading content ...
Loading content ...