EP2534-0002 | EtherCAT Box, 4-channel PWM output, 24 V DC, 2 A, M12, current-controlled
connection
2 | Rx+
3 | Rx-
4 | Tx-
2 | n. c.
3 | PWM-
4 | PWM+
5 | Shield
2 | +24 V DC UP
3 | GNDS
4 | GNDP
EP2534-0002 | EtherCAT Box, 4-channel PWM output, 24 V DC, 2 A, M12, current-controlled
The EP2534-0002 EtherCAT Box regulates the output current by pulse width control of the peripheral voltage on four channels. The current values ranging from 0 to a maximum output current of 2 A are specified by the automation device through a 16-bit value. The sum current of all outputs is limited to 4 A. The output stages are protected against overload and short-circuit proof. The signal state of the channels is indicated by LEDs. The signal connection is established via screw-type M12 connectors. One channel is available per M12 socket.
Product status:
product announcement | estimated market release 1st quarter 2026
Product information
| Technical data | EP2534-0002 |
|---|---|
| Protocol | EtherCAT |
| Bus interface | 2 x M8 socket, 4-pin, a-coded, shielded |
| Number of outputs | 4 |
| Output connections | M12 x 1, 5-pin, a-coded |
| Load type | inductive > 1 mH |
| Max. output current | 2 A per channel, ∑ 4 A |
| Short-circuit current | typ. < 4 A |
| PWM clock frequency | 30 kHz default |
| Distributed clocks | – |
| Current consumption from US | typ. 130 mA |
| Auxiliary power current | typ. 20 mA + load |
| Duty factor | 0…100% (current-controlled) |
| Resolution | 10 bit |
| Reverse voltage protection | yes |
| Power supply connection | feed: 1 x M8 male socket, 4-pin, a-coded; downstream connection: 1 x M8 female socket, 4-pin, a-coded |
| Electrical isolation | 500 V |
| Special features | 1 output per M12 connector, PWM current controlled |
| Weight | approx. 165 g |
| Operating temperature | -25…+60°C |
| Storage temperature | -40…+85°C |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP65/66/67 (conforms to EN 60529)/variable |
| Approvals/markings | CE, UL |
| Housing data | 8 x M8, 4 x M12 |
|---|---|
| Dimensions (W x H x D) | 30 mm x 126 mm x 26.5 mm |
| Material | PA6 (polyamide) |
| Installation | 2 fixing holes 3.5 mm diameter for M3 |
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2025 - Terms of Use