EL2634 | EtherCAT Terminal, 4-channel relay output, 250 V AC, 30 V DC, 4 A
Signal LED 1
Signal LED 3
Signal LED 2
Signal LED 4
13
14
33
34
23
24
43
44
Top view
Contact assembly
EL2634 | EtherCAT Terminal, 4-channel relay output, 250 V AC, 30 V DC, 4 A
The EL2634 output terminal has four relays, each with a single contact. The relay contact can be used up to 250 V AC or 30 V DC. The signal state of the EtherCAT Terminal is indicated by light emitting diodes. The EL2634 features potential-free contacts.
Special features:
- Relay output
- 4 x make contact
- Connection of ohmic and inductive loads
- potential-free
- no power contacts
Product status:
regular delivery
Product information
- Technical data
- Ordering information
- Accessories
- Documentation and downloads
- Beckhoff Information System
- Further information
- Related products
| Technical data | EL2634 |
|---|---|
| Connection technology | relay output |
| Number of outputs | 4 x make contacts |
| Nominal voltage | 250 V AC/30 V DC |
| Load type | ohmic, inductive |
| Distributed clocks | – |
| Ohmic switching current | 4 A AC/DC per channel |
| Minimum permitted load | 0.1 mA at 0.1 V DC (at 120 operations/min.) |
| Inductive switching current | 2 A AC/DC per channel |
| Lamp test, electronic ballast | – |
| Current consumption E-bus | 80 mA |
| Electrical isolation | 500 V (E-bus/field potential) |
| Current consumption power contacts | – |
| Bit width in the process image | 4 outputs |
| Operating cycles mech. (min.) | 2 x 107 (at 18 x 103 switching cycles per hour) |
| Operating cycles electr. (min.) | 1 x 105 (3 A/30 V DC ohmic load) |
| Configuration | no address or configuration setting |
| Weight | approx. 70 g |
| Operating/storage temperature | -25…+60 °C/-40…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Pluggable wiring | for all ESxxxx terminals |
| Approvals/markings | CE, UL |
| Housing data | EL-12-8pin | ES-12-8pin |
|---|---|---|
| Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
| Material | polycarbonate | |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm | |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
| Side by side mounting by means of | double slot and key connection | |
| Marking | labeling of the BZxxx series | |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver | |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² | s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG 28…14, st*: AWG 28…14, f*: AWG 26…16 | s*: AWG 28…16, st*: AWG 28…16, f*: AWG 26…16 |
| Stripping length | 8…9 mm | 9…10 mm |
| Current load power contacts | Imax: 10 A | |
*s: solid wire; st: stranded wire; f: with ferrule
| Ordering information | |
|---|---|
| EL2634 | EtherCAT Terminal, 4-channel relay output, 250 V AC, 30 V DC, 4 A |
| ES2634 | EtherCAT Terminal, 4-channel relay output, 250 V AC, 30 V DC, 4 A, pluggable wiring |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2023 - Terms of Use