The EJ2262 EtherCAT plug-in module connects the binary control output signals at the process level with electrical isolation. The outputs are controlled with an adjustable integral multiple (oversampling factor: n) of the bus cycle time (n microcycles per bus cycle). For each microcycle, the module receives a process data block that is output consecutively. The timebase of the module can be synchronized precisely with other EtherCAT devices via distributed clocks. An output pattern with a significantly higher pulse sequence than the bus cycle time is thus output precisely with the system-wide timebase. This procedure enables the temporal resolution of the digital output signals to be increased to n times the bus cycle time. The maximum output rate is 1 Msamples/s.
Special features:
- push-pull output
- connection of different load types possible (resistive, inductive, lamp load)
- synchronized operation through distributed clocks XFC technology possible
- multiple sampling of a process data through oversampling
Product status:
regular delivery
Product information
| Technical data | EJ2262 |
|---|---|
| Number of outputs | 2 |
| Rated load voltage | 24 V DC (-15%/+20%) |
| Load type | resistive, inductive, lamp load |
| Oversampling factor | n = integer multiple of the cycle time, 1…1000 |
| Distributed clocks | yes |
| Distributed clock accuracy | << 1 µs |
| Max. output current | 0.5 A (short-circuit proof in push operation) per channel |
| Switching-off energy | < 150 mJ/channel |
| Output rate | max. 1 Msample/s, min. cycle 1 µs |
| Auxiliary power current | typ. 10 mA + load |
| Current consumption E-bus | typ. 135 mA |
| Electrical isolation | 500 V (E-bus/field potential) |
| Weight | approx. 30 g |
| Operating temperature | -25…+60°C |
| Storage temperature | -40…+85°C |
| Relative humidity | 95%, no condensation |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| Protect. rating/installation pos. | IP20/see documentation |
| Approvals/markings | CE |
| Housing data | EJ_12_16pin_Code14 |
|---|---|
| Weight | approx. 30 g |
| Protection rating | IP20 |
| Material | polycarbonate |
| Dimensions | Width (single) | 12 mm |
| Dimensions | Height | 66 mm |
| Dimensions | Depth | 55 mm |
| Installation | 2 x 20-pin socket strip on signal distribution board |
| Connection mechanism | application-specific plug on the signal distribution board |
| Mechanical coding | yes |
| Material compliance | EJ2262 |
|---|---|
| REACH SVHC | no |
| POP | compliant |
| RoHS | compliant with exemption |
| RoHS exemption | 7c-I: Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors |
| China-RoHS | www.beckhoff.com/china-rohs-io |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2026 - Terms of Use