EK1322 | 2-port EtherCAT P junction with feed-in
EK1322 | 2-port EtherCAT P junction with feed-in
Hannover Messe 2016: EtherCAT P
The EK1322 2-port EtherCAT P junction can be used in an EtherCAT Terminal segment at any desired position between the EtherCAT Terminals and enables configuration of EtherCAT P star topologies. A modular EtherCAT P star hub can be realized by using several EK1322 units in a station.
Special features:
- connection technology: 2 x P-coded M8 sockets
- can be used for configuring an EtherCAT P star topology
The front terminal points are used for the system and sensor supply US and the peripheral voltage for actuators UP for the EtherCAT P outputs. A connection to individual EtherCAT P devices or even complete EtherCAT P segments can be established via the P-coded M8 sockets, which enable the connection of an EtherCAT P cable with M8 connector.
Product status:
regular delivery
Product information
| Technical data | EK1322 |
|---|---|
| Task within EtherCAT system | coupling of EtherCAT P junctions |
| Data transfer medium | EtherCAT P cable, shielded, to 100BASE-TX EtherCAT P networks |
| Bus interface | 2 x M8 socket, P-coded, shielded |
| Power supply | external feed-in: 24 V DC (-15 %/+20 %) for US and UP |
| Sum current | max. 3 A per US and UP for all EtherCAT P ports in total |
| Current consumption from US | typ. 3 mA |
| Current consumption from UP | typ. 3 mA |
| Current consumption E-bus | 200 mA |
| Operating temperature | -25…+55°C |
| Storage temperature | -40…+85°C |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE, UL |
| Housing data | EK-24-PWR |
|---|---|
| Design form | compact terminal housing with signal LEDs |
| Material | polycarbonate |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | – |
| Wiring | depending on module |
| Connection cross-section | s*: 0.2…1.5 mm², st*: 0.2…1.5 mm², f*: 0.25…0.75 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG28…14 |
| Stripping length | 8…9 mm |
| Dimensions (W x H x D) | 24 mm x 100 mm x 52 mm without connector |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2025 - Terms of Use