As an EtherCAT slave, the EL6711-0010 CC-Link slave terminal enables data exchange between EtherCAT and CC-Link. The terminal is a slave, both on the EtherCAT and on the CC-Link side, so that an EtherCAT master can exchange data with a CC-Link master via this terminal. All CC-Link-specific settings such as node address, baud rate, data size and many more are parameterized via the EtherCAT master. There is no need for complex configurations on the CC-Link side; no further parameterization via the CC-Link master is required.
Product status:
regular delivery
Product information
| Technical data | EL6711-0010 | 
|---|---|
| Technology | CC-Link slave terminal | 
| Number of channels | 1 | 
| Fieldbus | CC-Link slave version 1.1 or 2.0 (parameterizable) | 
| Data transfer rates | 156 kbaud…10 Mbaud | 
| Bus interface | 1 x open style connector, 5-pin, included | 
| Max. number of bytes fieldbus | 16 words (version 1.1) or 128 words (version 2.0) | 
| Bus device | – | 
| Hardware diagnostics | status LEDs | 
| Distributed clocks | – | 
| Current consumption power contacts | – | 
| Special features | status LEDs | 
| Operating temperature | -25…+60°C | 
| Storage temperature | -40…+85°C | 
| Relative humidity | 95%, no condensation | 
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 | 
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 | 
| Protect. rating/installation pos. | IP20/see documentation | 
| Approvals/markings | CE, UL | 
| Housing data | EL-24 | 
|---|---|
| Design form | compact terminal housing with signal LEDs | 
| Material | polycarbonate | 
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | 
| Side by side mounting by means of | double slot and key connection | 
| Marking | – | 
| Wiring | specific push-in connection | 
| Dimensions (W x H x D) | 24 mm x 100 mm x 52 mm | 
Loading content ...
© Beckhoff Automation 2025 - Terms of Use
                          