KL2542 | Bus Terminal, 2-channel motion interface, DC motor, 48 V DC, 3.5 A
+24 V DC
0 V
48 V, 0 V
KL2542 | Bus Terminal, 2-channel motion interface, DC motor, 48 V DC, 3.5 A
The KL2542 Bus Terminal enables direct operation of two DC motors. It is galvanically isolated from the K-bus. The speed or position is specified by the automation device via a 16 bit value. Connection of an incremental encoder enables a simple servo axis to be realized. The output stage is protected against overload and short-circuit. The Bus Terminal contains two channels that indicate their signal state by means of light emitting diodes. The LEDs enable quick local diagnosis.
Product status:
regular delivery
Product information
| Technical data | KL2542 |
|---|---|
| Number of outputs | 2 |
| Rated load voltage | 8…48 V DC |
| Load type | DC brush motor, inductive |
| Max. output current | 2 x 3.5 A (short-circuit proof, thermal-overload proof) for both channels together |
| PWM clock frequency | 35 kHz with 180° phase shift each |
| Duty factor | 0…100% (voltage-controlled) |
| Resolution | max. 12 bit current, 16 bit speed |
| Electrical isolation | 500 V (K-bus/field potential) |
| Current consumption K-bus | typ. 100 mA |
| Current consumption sensor supply | typ. 20 mA |
| Bit width in the process image | 48 inputs/outputs: 2 x 16 bit data, 2 x 8 bit control/status |
| Configuration | adaptation and optimisation of the respective motor via the controller and registers or KS2000 configuration software |
| Weight | approx. 100 g |
| Operating temperature | 0…55°C |
| Storage temperature | -25…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Pluggable wiring | for all KSxxxx Bus Terminals |
| Approvals/markings | CE |
| Housing data | KL-24-2x8pin | KS-24-2x8pin |
|---|---|---|
| Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
| Material | polycarbonate | |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
| Side by side mounting by means of | double slot and key connection | |
| Marking | labeling of the BZxxxx series | |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver | |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² | s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 | s*: AWG28…16, st*: AWG28…16, f*: AWG26…16 |
| Stripping length | 8…9 mm | |
| Current load power contacts | Imax: 10 A | |
| Dimensions (W x H x D) | 24 mm x 100 mm x 68 mm | |
*s: solid wire; st: stranded wire; f: with ferrule
| Ordering information | |
|---|---|
| KL2542 | Bus Terminal, 2-channel motion interface, DC motor, 48 V DC, 3.5 A |
| KS2542 | Bus Terminal, 2-channel motion interface, DC motor, 48 V DC, 3.5 A, plug-in wiring level |
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2025 - Terms of Use