KL6581 | Bus Terminal, 1-channel communication interface, EnOcean®, master
+24 V DC
0 V
KL6581 | Bus Terminal, 1-channel communication interface, EnOcean®, master
The bidirectional EnOcean® technology receives signals from battery-less sensors or transmits data to actuators. With a radio signal range of 30 m, the wiring of buildings can be simplified significantly. The KL6581 EnOcean® master terminal is the link between the KL6583 EnOcean® transmitter and receiver modules and the application. Up to eight KL6583 EnOcean® transmitters and receivers can be connected to a KL6581 EnOcean® master terminal. The KL6583 modules are connected to the KL6581 via two wires for the power supply and two wires for the data bus that transmits the EnOcean® telegrams. The maximum total length of the data bus is 500 m.
Product status:
regular delivery
Product information
| Technical data | KL6581 |
|---|---|
| Technology | EnOcean® |
| Number of channels | 1 |
| Supported telegrams | RPS (Repeated Switch Communication), RORG: F6, ORG: 05 1BS (1 Byte Communication), RORG: D5, ORG: 06 4BS (4 Byte Communication), RORG: A5, ORG: 07 |
| Data transfer standard | – |
| Connection | 2 x 2-wires directly at the KL6583 EnOcean® module (connection of max. 8 KL6583) |
| Transmission rate | 125 kbaud |
| Cable length | max. 500 m |
| Power supply | via the K-bus |
| Connector cable | up to 500 m |
| Current consumption K-bus | typ. 60 mA |
| Current consumption power contacts | typ. 20 mA + load |
| Configuration | not required |
| Nominal voltage | 24 V DC (-15%/+20%) |
| Special features | up to 8 KL6583 EnOcean® transmitter and receiver modules |
| Weight | approx. 85 g |
| Operating temperature | 0…55°C |
| Storage temperature | -25…+85°C |
| Relative humidity | 95%, no condensation |
| Protect. rating/installation pos. | IP20/variable |
| Approvals/markings | CE, UL |
| Housing data | KL-12-8pin |
|---|---|
| Design form | compact terminal housing with signal LEDs |
| Material | polycarbonate |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | labeling of the BZxxxx series |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 |
| Stripping length | 8…9 mm |
| Current load power contacts | Imax: 10 A |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm |
*s: solid wire; st: stranded wire; f: with ferrule
Loading content ...
| Material compliance | KL6581 |
|---|---|
| REACH SVHC | no |
| POP | compliant |
| RoHS | compliant with exemption |
| RoHS exemption | 7c-I: Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors |
| China-RoHS | www.beckhoff.com/china-rohs-io |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
Loading content ...
Loading content ...
© Beckhoff Automation 2026 - Terms of Use