KL1362 | Bus Terminal, 2-channel digital input, break-in alarm, 24 V DC, 3 ms
+24 V
KL1362 | Bus Terminal, 2-channel digital input, break-in alarm, 24 V DC, 3 ms
The digital KL1362 input terminal analyzes the input signals of break-in sensors with the aid of a current loop. It enables safe monitoring of alarm contacts with fixed resistance ratio. In addition to the display of the switching state from the sensor, short circuit or open circuit is also detected. The LEDs display the signal states or any error states.
Special features:
- direct connection of break-in sensors
- possibility to diagnose open circuit and short circuit
Product status:
regular delivery
Product information
- Technical data
- Ordering information
- Accessories
- Software
- Documentation and downloads
- Related products
| Technical data | KL1362 |
|---|---|
| Connection technology | 2-wire |
| Specification | break-in alarm |
| Number of inputs | 2 |
| Nominal voltage | 24 V (-15 %/+20 %) |
| “0” signal current | ≤ 1 mA |
| “1” signal current | ≥ 1 mA |
| Operating voltage | 5.1 V |
| Line interruption | < 0.1 mA |
| Short-circuit | > 3 mA |
| Cable resistance | ≤ 200 Ω |
| Input filter | 3.0 ms |
| Current consumption K-bus | typ. 35 mA |
| Electrical isolation | 500 V (K-bus/field potential) |
| Bit width in the process image | 4 inputs |
| Configuration | no address or configuration setting |
| Special features | monitoring of alarm contacts |
| Weight | approx. 55 g |
| Operating/storage temperature | 0…+55 °C/-25…+85 °C |
| Relative humidity | 95 %, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Pluggable wiring | for all KSxxxx Bus Terminals |
| Approvals/markings | CE, UL, ATEX, IECEx, DNV GL |
| Ex marking | ATEX: II 3 G Ex nA IIC T4 Gc IECEx: Ex ec IIC T4 Gc |
| Housing data | KL-12-8pin | KS-12-8pin |
|---|---|---|
| Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
| Material | polycarbonate | |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm | |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
| Side by side mounting by means of | double slot and key connection | |
| Marking | labeling of the BZxxx series | |
| Wiring | solid conductor (e), flexible conductor (f) and ferrule (a): spring actuation by screwdriver | |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² | s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG 28…14, st*: AWG 28…14, f*: AWG 26…16 | s*: AWG 28…16, st*: AWG 28…16, f*: AWG 26…16 |
| Stripping length | 8…9 mm | 9…10 mm |
| Current load power contacts | Imax: 10 A | |
*s: solid wire; st: stranded wire; f: with ferrule
| Ordering information | |
|---|---|
| KL1362 | Bus Terminal, 2-channel digital input, break-in alarm, 24 V DC, 3 ms |
| KS1362 | Bus Terminal, 2-channel digital input, break-in alarm, 24 V DC, 3 ms, pluggable wiring |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2023 - Terms of Use