IP20x0-Bxxx, 8 mm, snap type
Fieldbus connection (design depends
on the fieldbus)
on the fieldbus)
8 mm I/O connection sockets
Signal status display
Labeling areas
Power supply status display:
Box supply (US)
Auxiliary voltage (UP)
Power supply feed
Power supply downstream
connection
connection
1 | +24 V DC US
3 | GND
4 | Output
3 | GND
4 | Output
1 | +24 V DC US
2 | +24 V DC UP
3 | GND
4 | GND
2 | +24 V DC UP
3 | GND
4 | GND
2-wire
3-wire
Top view
I/O connection
Connector assignment
IP20x0-Bxxx, 8 mm, snap type
The IP2000-Bxxx digital output connects the binary control signals from the automation unit on to the actuators at the process level. The eight outputs handle load currents of up to 0.5 A and indicate their status through light emitting diodes. The signals are connected via Ø8 mm snap type connectors.
The outputs are short-circuit proof and protected against inverse connection.
Product status:
service phase | Possibly with other technical features or equipment in case of a service order or repair
| Product variants | Communication | Bus interface |
|---|---|---|
| IP2000-B200 | Lightbus | 2 x fiber-optic socket for plug ZS1020-0010 |
| IP2000-B310 | PROFIBUS | 1 x M12 socket, 5-pin, B-coded |
| IP2000-B318 | PROFIBUS | 1 x M12 socket, 5-pin, 1 x M12 plug, 5-pin (tee-connector integrated), B-coded |
| IP2000-B400 | Interbus | 1 x M23 female socket 9-pin, 1 x M23 male socket 9-pin |
| IP2000-B510 | CANopen | 1 x M12 plug, 5-pin |
| IP2000-B518 | CANopen | 1 x M12 plug, 5-pin, 1 x M12 socket, 5-pin (tee-connector integrated) |
| IP2000-B520 | DeviceNet | 1 x M12 plug, 5-pin |
| IP2000-B528 | DeviceNet | 1 x M12 plug, 5-pin, 1 x M12 socket, 5-pin (tee-connector integrated) |
| IP2000-B730 | Modbus RTU | 1 x M12 socket, 5-pin, B-coded |
| IP2000-B800 | RS485/RS422 | 1 x M12 socket, 5-pin, B-coded |
| IP2000-B810 | RS232 | 1 x M12 socket, 5-pin, B-coded |
© Beckhoff Automation 2024 - Terms of Use