SbloccaBloccaChiudi

Sede centrale Svizzera
Beckhoff Automation AG

Rheinweg 7
8200 Schaffhausen, Svizzera

+41 52 633 40 40
info@beckhoff.ch
www.beckhoff.com/it-ch/

Supporto tecnico Schaffhausen (German)

+41 52 633 40 40
support@beckhoff.ch
Modulo di contatto

Supporto tecnico Arbon (German)

+41 71 447 10 80
support@beckhoff.ch

Supporto tecnico Lyssach (German)

+41 34 447 44 88
support@beckhoff.ch

Supporto tecnico Yverdon-les-Bains (French)

+41 24 447 27 00
support@beckhoff.ch

Supporto tecnico Losone (Italian)

+41 91 792 24 40
support@beckhoff.ch

TS5055 | TwinCAT NC Flying Saw

TS5055 | TwinCAT NC Flying Saw

TS5055 | TwinCAT NC Flying Saw

TS5055 | TwinCAT NC Flying Saw

TS5055 | TwinCAT NC Flying Saw

TwinCAT NC Flying Saw implements the coupling of a slave axis to a master axis in a certain synchronous position (flying saw). PLC function blocks enable coupling and uncoupling as well as parameterization.

  • The master axis can be a real axis, a virtual axis, or some other external source of actual values.
  • synchronization of the slave axis from any motion situation (stop, forward or reverse travel) with the master in motion
  • simple synchronization with the master velocity
  • precise position synchronization with the master axis (velocity and position)
  • synchronous velocity can be set via a coupling factor
  • optional return prevention as additional safety function
  • superimposed section compensation during the synchronous phase for dynamic position correction

Product status:

regular delivery

Product information

Technical dataTS5055
Operating systemWindows 7, Windows 10, Windows CE
Min. TwinCAT levelTwinCAT NC PTP
Ordering information
TS5055IEC 61131-3 software library for TwinCAT, realizes a “flying saw”

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2024 - Terms of Use