AX8600 | DC power supply module
AX8600 | DC power supply module
AX8600 | DC power supply module
AX8600 | DC power supply module
AX8600 | DC power supply module
AX8600 | DC power supply module
The DC supply module is used for DC link expansion (DC voltage) of an upstream AX8000 system. If, for example, the width of the control cabinet is not sufficient for mounting all AX8000 modules, a new series can be started with the AX8600 DC supply module. The AX-Bridge of the last module in the upstream system is connected to the AX8600 in the next series via the DC link connection cable ZK4875-900x-xxxx. This can be repeated up to the maximum permitted total DC link capacity.
The AX8600 features a built-in brake chopper for connecting an external braking resistor. Alternatively, the energy can be temporarily stored in the AX8810 capacitor module.
A separate 24 V DC power supply and an EtherCAT connection are required in each case.
Product status:
regular delivery
Product information
| Technical data | AX8600-0000-0000 |
|---|---|
| Function | DC link extension |
| DC link voltage | 24…680 V DC |
| DC link output current | 50 A DC |
| System bus | EtherCAT |
| Drive profile | DS402 |
| Ambient temperature (operation) | 0…40°C |
| Approvals/markings | CE, cULus |
| Housing data | AX862x |
|---|---|
| Protection rating | IP20 |
| Width | 60 mm |
| Dimensions | AX8600-0000-0000 |
|---|---|
| Height without connectors | 230 mm |
| Depth without connectors | 192 mm |
| Width | 60 mm |
Loading content ...
| Material compliance | AX8600 |
|---|---|
| CAS No. | 7439-92-1 |
| REACH SVHC | Lead |
| REACH Annex XVII | compliant |
| REACH Annex XIV | compliant |
| SCIP No. | SCIP submission in progress |
| POP | compliant |
| RoHS | compliant with exemption |
| RoHS exemption | 6a: Lead in steel with a maximum mass fraction of 0.35% lead, 7a: Lead in solders with a high melting point with a minimum mass fraction of 85% lead, 7c-I: Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors |
| China-RoHS | www.beckhoff.com/china-rohs-motion |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
Loading content ...
© Beckhoff Automation 2026 - Terms of Use