EL2262 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, oversampling
+24 V DC
0 V
⏚
EL2262 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, oversampling
EtherCAT timestamp: high-precision interaction of controller and environment – to the exact nanosecond
EtherCAT oversampling: maximum sampling rates irrespective of the EtherCAT cycle time
Distributed Clocks: the integrated time management system in EtherCAT
Decentralised, end-to-end system synchronisation: With Distributed Clocks and EtherCAT.
The EL2262 digital output terminal connects the binary control output signals at the process level with electrical isolation. The outputs are controlled with an adjustable integral multiple (oversampling factor: n) of the bus cycle frequency (n microcycles per bus cycle). For each bus cycle, the EtherCAT Terminal receives a process data block that is output consecutively. The timebase of the terminal can be synchronized precisely with other EtherCAT devices via distributed clocks. An output pattern with a significantly higher pulse sequence than the bus cycle time is thus output precisely with the system-wide timebase. This procedure enables the temporal resolution of the digital output signals to be increased to n times the bus cycle time. The maximum output rate is 1 Msamples/s.
Special features:
- push-pull output
- connection of different load types possible (resistive, inductive, lamp load)
- synchronized operation through distributed clocks XFC technology possible
- multiple sampling of a process data through oversampling
Product status:
regular delivery
Product information
| Technical data | EL2262 |
|---|---|
| Connection technology | 4-wire |
| Number of outputs | 2 |
| Nominal voltage | 24 V DC (-15%/+20%) |
| Load type | resistive, inductive, lamp load |
| Oversampling factor | n = integer multiple of the cycle time, 1…1000 |
| Timestamp accuracy | 10 ns between the channels |
| Distributed clocks | yes |
| Distributed clock accuracy | << 1 µs |
| Max. output current | 0.5 A (short-circuit proof in push operation) per channel |
| Output stage | push-pull |
| Short-circuit current | typ. < 1.5 A |
| Reverse polarity protection | yes |
| Current limitation | typ. 4 A/150 μs |
| Switching-off energy | < 150 mJ/channel |
| Switching times | typ. TON: < 1 µs, typ. TOFF: < 1 µs |
| Output rate | max. 1 Msample/s, min. cycle 1 µs |
| Current consumption E-bus | typ. 70 mA |
| Current consumption power contacts | typ. 35 mA + load |
| Bit width in the process image | n x 2 outputs + 32 bit CycleCounter + 32 bit StartTimeNextOutput |
| Configuration | via TwinCAT System Manager |
| Electrical isolation | 500 V (E-bus/field potential) |
| Special features | up to 1000 x oversampling, max. 1 Msample/s, min. output cycle 1 µs |
| Weight | approx. 60 g |
| Operating temperature | 0…55°C |
| Storage temperature | -25…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/variable |
| Pluggable wiring level | for all ESxxxx terminals |
| Approvals/markings | CE, CCC, UL, ATEX, IECEx, cFMus |
| Ex marking | ATEX: II 3G Ex ec IIC T4 Gc IECEx: Ex ec IIC T4 Gc cFMus: Class I, Division 2, Groups A, B, C, D Class I, Zone 2, AEx ec IIC T4 Gc |
| Housing data | EL-12-8pin | ES-12-8pin |
|---|---|---|
| Design form | compact terminal housing with signal LEDs | terminal housing with pluggable wiring level |
| Material | polycarbonate | |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock | |
| Side by side mounting by means of | double slot and key connection | |
| Marking | labeling of the BZxxxx series | |
| Wiring | solid conductor (s), flexible conductor (st) and ferrule (f): spring actuation by screwdriver | |
| Connection cross-section | s*: 0.08…2.5 mm², st*: 0.08…2.5 mm², f*: 0.14…1.5 mm² | s*: 0.08…1.5 mm², st*: 0.08…1.5 mm², f*: 0.14…1.5 mm² |
| Connection cross-section AWG | s*: AWG28…14, st*: AWG28…14, f*: AWG26…16 | s*: AWG28…16, st*: AWG28…16, f*: AWG26…16 |
| Stripping length | 8…9 mm | 9…10 mm |
| Current load power contacts | Imax: 10 A | |
| Dimensions (W x H x D) | 12 mm x 100 mm x 68 mm | |
*s: solid wire; st: stranded wire; f: with ferrule
| Ordering information | |
|---|---|
| EL2262 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, oversampling |
| ES2262 | EtherCAT Terminal, 2-channel digital output, 24 V DC, 0.5 A, oversampling, pluggable wiring level |
Loading content ...
| Material compliance | EL2262 |
|---|---|
| REACH SVHC | no |
| POP | compliant |
| RoHS | compliant with exemption |
| RoHS exemption | 7c-I: Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors |
| China-RoHS | www.beckhoff.com/china-rohs-io |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2026 - Terms of Use