Drive technology in a new form factor
Optimum multi-channel drive solutions can be constructed with the AX8000 multi-axis servo system. The required number of single or 2-channel axis modules is connected to the central power supply module or the combined supply and axis module.
The -based AX8000 multi-axis servo system combines powerful FPGA technology with multi-core ARM processors. The new multi-channel current control technology makes extremely short sampling and reaction times possible. The entirely hardware-implemented current controller combines the advantages of analog and digital control technology: Setpoint deviations of the current can be reacted to within 1 µs; the shortest current controller cycle time is 31.25 µs at a switching frequency of 16 kHz. The processing of the EtherCAT process data (actual and setpoint values) can take place without a processor almost without delay in the hardware, so that the minimum EtherCAT cycle time is only 62.5 µs.
Due to support for oversampling technology, the process data can even be sampled several times within a communication cycle if required and transmitted to the controller via EtherCAT. The oversampling method is used in precision processing machines as well as in machines and plants where the evaluation of high-resolution measured values is technologically necessary.
One Cable Technology (OCT)
In 2011, Beckhoff introduced the One Cable Technology for servomotors. Since then OCT has revolutionized the servo market, because only one connection cable is required for motor current and encoder feedback. The AX8000 multi-axis servo system supports OCT, the One Cable Technology for power and feedback. In combination with the servomotors from the series (standard), (increased inertia), (anodized surface) and (stainless steel), the cabling is reduced to the obligatory motor cable, through which the feedback signals are also transmitted. As with the sensorless controller, the user saves having to use an additional feedback cable. All the information required for control purposes is transferred reliably and fail-safe via a digital interface.
Drive-integrated safety functions
The AX8000 with supports the typical drive-integrated safety functions and meets the requirements of EN ISO 13849-1:2015 (Cat 4, PL e), EN 61508:2010 (SIL 3) and EN 62061:2005 + A1:2013/A2:2015 (SIL CL3).
- stop functions (STO, SOS, SS1, SS2)
- speed functions (SLS, SSM, SSR, SMS) at up to eight speeds
- position functions (SLP, SCA, SLI) with referencing cams
- acceleration functions (SAR, SMA)
- direction of rotation functions (SDIp, SDIn)
- brake functions (SBC, SBT)