Movers, length 70 mm, spring-loaded
Movers, length 70 mm, spring-loaded
Movers with the product designation AT9014 are elements of the XTS guide rail system from Beckhoff. The mover set-up consists of an aluminum base body, partially sprung plastic rollers and a magnetic plate set. The design is available in 55 mm or 70 mm lengths and is therefore suitable for the smallest possible product spacing, as well as for higher payloads. All variants are available with “mover standard” and “mover 1” magnetic plate sets. In comparison to mover types with the product designation AT9011, this mover is intended for higher mileage. Thanks to a selection of different guide rail designs, the mover is suitable for individual travel paths. The low overall weight of the mover also allows for particularly dynamic travel movements.
Product status:
regular delivery
| Product variants | Length | Magnet pitch |
|---|---|---|
| AT9014-0055-x550 | 55 mm | 60 mm |
| AT9014-x070-x550 | 70 mm | 72 mm |
Product information
| Technical data | AT9014-x070-x550 |
|---|---|
| Mover length | 70 mm |
| Magnet pitch | 72 mm |
| Main body material | aluminum |
| Rollers material | plastic |
| Weight | 651 g |
| Peak force | AT9001-x550 (5-pin): 100 N (specification refer to straight sections) |
| Continuous force | AT9001-x550 (5-pin): 30 N (specification refers to straight sections) |
| Payload | typ. 600 g (up to 1000 g possible after consultation) |
| Mileage | 30,000 km with 600 g at Ø 1.5 m/s achieved in life cycle test; the general conditions of the application have an effect on the mileage; further details about test conditions on request |
| Electronical detection | standard and mover 1 |
| Possible curve segments | straight (AT9000, AT9100), 180° (clothoid, AT9050-0500-0170), 45° (AT9040-0750-0070, AT9040-1250-0070) |
| Technical data | XTS movers |
|---|---|
| AT9014-0070-0550 | mover, spring-loaded, length 70 mm, 651 g, mounted with magnetic plate set AT9001-0550 (mover standard) |
| AT9014-0070-1550 | mover, spring-loaded, length 70 mm, 651 g, mounted with magnetic plate set AT9001-1550 (mover 1) |
| AT9014-1070-0550 | mover, suitable for NCT technology, spring-loaded, length 70 mm, 651 g, mounted with magnetic plate set AT9001-0550 (mover standard) |
| AT9014-1070-1550 | mover, suitable for NCT technology, spring-loaded, length 70 mm, 651 g, mounted with magnetic plate set AT9001-1550 (mover 1) |
Loading content ...
| Material compliance | AT9014-x070-x550 |
|---|---|
| CAS No. | 7439-92-1, 79-94-7 |
| REACH SVHC | Lead, Tetrabromobisphenol A |
| REACH Annex XVII | compliant |
| REACH Annex XIV | compliant |
| POP | compliant |
| RoHS | compliant with exemption |
| RoHS exemption | 6a: Lead in steel with a maximum mass fraction of 0.35% lead |
| China-RoHS | www.beckhoff.com/china-rohs-motion |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
| Material compliance | SCIP | SCIP No. |
|---|---|
| AT9014-0070-0550 | 1a89267d-a80f-4f01-8014-44cad1ccc9c8 |
| AT9014-0070-1550 | b3891aa4-d1d2-434c-9db0-30bd85c43d0a |
| AT9014-1070-0550 | 07d7f615-9827-4d1e-84ef-a7fc0ccd6c92 |
| AT9014-1070-1550 | bd376be4-9016-4f03-8c7a-c1e0f7352c75 |
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2026 - Terms of Use