DetachFixClose

Headquarters Malaysia
Beckhoff Automation Sdn. Bhd.

Lot 7, Lorong Teknologi A, Jalan Teknologi,
Taman Perindustrian Sains Selangor, Kota Damansara,
47810, Petaling Jaya, Selangor, Malaysia

+60 3 6151-3088
info@beckhoff.com.my
www.beckhoff.com/ms-my/

ZK4500-8023-xxxx | Motor connection cable 1.5 mm² with M23 speedtec® plug, drag-chain suitable

ZK4500-8023-xxxx | Motor connection cable 1.5 mm² with M23 speedtec® plug, drag-chain suitable

ZK4500-8023-xxxx | Motor connection cable 1.5 mm² with M23 speedtec® plug, drag-chain suitable

Contact assembly

Contact assembly

ZK4500-8023-xxxx | Motor connection cable 1.5 mm² with M23 speedtec® plug, drag-chain suitable

ZK4500-8023-xxxx | Motor connection cable 1.5 mm² with M23 speedtec® plug, drag-chain suitable

Contact assembly

Contact assembly

highly flexible, drag-chain suitable cable with 5 mio. bending cycles, max. 240 m/min, max. 30 m/s²,

min. bending radius = 89 mm (7 x OD), max. drag-chain length horizontal 20 m, vertical 5 m,

(4 x 1.5 mm² + (2 x 0.75 mm²) + (2 x AWG22))

from 25 m motor choke required

The cable is UL and CSA listed.

suitable for:

  • AM883x
  • AM8x4x to AM8x6x (up to winding code P)
  • AL804x (winding code J to L) and AL806x (winding code J to L)
  • AX5000 (1,5…12 A)

Product status:

regular delivery

Product information

Technical dataHead A
Installation sizeM23
Connector typeplug
Contact typefemale
Number of positions (face)Power: 3+PE, Signal: 5
Wire terminationcrimp connection
Body colormetal
Technical dataHead B
Installation sizePitch dimension 7.62 mm
Connector typeplug
Contact typefemale
Number of positions (face)4-pin
Wire terminationClamping yoke connection
Max. wire cross-sectionAWG24 ... AWG8 (0.2 mm² ... 10 mm²)
Body colorblack, similar to RAL 9011
Technical dataHead C
Installation sizePitch dimension 3.50 mm
Connector typeplug
Contact typefemale
Number of positions (face)5-pin
Wire terminationClamping yoke connection
Max. wire cross-sectionAWG28 ... AWG14 (0.2 mm² ... 1.5 mm²)
Body colorblack, similar to RAL 9011
Technical dataMeterware
Cross-section (power)1.50 mm² (approx. AWG16)
Cross-section (signal)AWG22 (approx. 0.34 mm²)
Usedrag-chain suitable
Material jacketTPU (thermoplastic polyurethane)
Outer cable diameter12.7 mm ± 0.4 mm (0.5" ± 0.0157")
Jacket colororange
A179.00 mm
A228.00 mm
B145.00 mm
B245.00 mm
C119.00 mm
C225.00 mm
Ordering informationLength
ZK4500-8023-xxxxxxxx = cable length in decimeters
xxxx = 0050example for 5 m length
sold by the meter, admissible total cable length see documentation of Servo Drive

Loading content ...

Loading content ...

© Beckhoff Automation 2024 - Terms of Use