AS1050 | Stepper motor without encoder
AS1050 | Stepper motor with encoder
AS1050 | Stepper motor without encoder
AS1050 | Stepper motor with encoder
The AS1000 stepper motors with flange codes from 42 to 86 mm (N1 = NEMA17, N2 = NEMA23, N3 = NEMA34) and torques from 0.4 to 5 Nm are ideally suited for use as auxiliary axes and positioning drives. They are characterized by robustness and high holding torques. Due to the integrated micro-stepping the motors can position very well even without a feedback system and require only a motion terminal for power electronics. Stepper motors can also be operated with TwinCAT NC PTP for synchronization functions such as cam plates or flying saws.
Product status:
regular delivery (not recommended for new projects) | recommended alternative: AS2022
Product information
| Data for 48 V DC | AS1050 |
|---|---|
| Nominal voltage | 24…48 V DC |
| Holding torque | 1.20 Nm |
| Rated current | 5.00 A |
| Resolution | 1.8°/200 full steps |
| Connection technology | M12 cable bundle |
| Ambient temperature (operation) | 0…40°C |
| Approvals/markings | CE |
| Material compliance | AS1050 |
|---|---|
| CAS No. | 7439-92-1 |
| REACH SVHC | Lead |
| REACH Annex XVII | compliant |
| REACH Annex XIV | compliant |
| POP | compliant |
| RoHS | compliant with exemption |
| RoHS exemption | 6b: Lead in aluminum with a maximum mass fraction of 0.4% lead, 6c: Copper alloy with a mass fraction of up to 4% lead |
| China-RoHS | www.beckhoff.com/china-rohs-motion |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
| Material compliance | SCIP | SCIP No. |
|---|---|
| AS1050-0000 | 4fdf6145-c5d6-47d9-9848-2d6fa4ace21c |
| AS1050-0110 | 1086bf5c-afca-43b5-8818-042061c643d2 |
| AS1050-0120 | 9f5ad270-7a1b-4e3f-9d28-d7ebeecc491b |
| Housing data | AS10xx |
|---|---|
| Protection rating | IP43 |
| Dimensions | AS1050 |
|---|---|
| a | 38.1 mm |
| b | 6.35 mm |
| d | 20.6 mm |
| k | 75.8 mm |
| l | 47.14 mm |
| m | 33 mm |
| o | 24 mm |
| r | 56 mm (NEMA23) |
| Order reference
AS1050-wxyz | |
|---|---|
| w = 0 | smooth shaft |
| x = 0 | standard motor without second shaft |
| x = 1 | second shaft (for AS1020/AS1050/AS1060 only), necessary for encoder |
| y = 0 | no incremental encoder |
| y = 1 | incremental encoder, 24 V DC, 200 increments (only available for AS1020, AS1050, AS1060), requires x = 1 |
| y = 2 | incremental encoder, 24 V DC, 1024 increments (only available for AS1020, AS1050, AS1060), requires x = 1 |
| z = 0 | standard |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2026 - Terms of Use