The Interbus slave terminal facilitates data exchange between EtherCAT and Interbus. For both bus systems the terminal “mirrors” up to 32-word input and 32-word output to the respective other system. The outputs are written to the inputs of the other bus with minimum delay. The terminal can use the Interbus protocol up to a baud rate of 2 Mbits. Due to the connection via EtherCAT, no PCI™ slots are required in the PC.
Product status:
regular delivery
Product information
| Technical data | EL6740-0010 |
|---|---|
| Technology | Interbus slave terminal |
| Number of channels | 1 |
| Fieldbus | Interbus, max. 400 m between 2 stations at 500 kbit/s |
| Data transfer rates | 500 kbit, 2 Mbit (default) |
| Interfaces | 2 x D-sub plug, 9-pin, plug and socket with screening and vibration lock |
| Max. number of bytes fieldbus | 32 word input and 32 word output |
| Hardware diagnostics | status LEDs |
| Distributed clocks | – |
| Connection type | only remote bus |
| Current consumption power contacts | – |
| Current consumption E-bus | typ. 450 mA |
| Special features | status LEDs |
| Weight | approx. 80 g |
| Operating temperature | 0…55°C |
| Storage temperature | -25…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/see documentation |
| Approvals/markings | CE, CCC, UL, ATEX, IECEx |
| Ex marking | ATEX: II 3 G Ex ec IIC T4 Gc IECEx: Ex ec IIC T4 Gc |
| Housing data | EL-24 |
|---|---|
| Design form | compact terminal housing with signal LEDs |
| Material | polycarbonate |
| Installation | on 35 mm DIN rail, conforming to EN 60715 with lock |
| Side by side mounting by means of | double slot and key connection |
| Marking | – |
| Wiring | specific push-in connection |
| Dimensions (W x H x D) | 24 mm x 100 mm x 52 mm |
Loading content ...
Loading content ...
© Beckhoff Automation 2025 - Terms of Use
