EPP9001-0060 | EtherCAT P/EtherCAT connector, with power transmission
2 | Rx+
3 | Rx-
4 | Tx-
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
2 | +24 V DC UP
3 | GNDS
4 | GNDP
EPP9001-0060 | EtherCAT P/EtherCAT connector, with power transmission
EtherCAT P: The one cable solution – One step closer to automation without control cabinets
The EPP9001-0060 EtherCAT P Box converts the incoming EtherCAT P signal (red M8 socket, P-coded) into an EtherCAT signal (green M8 socket). In addition, the voltage output from the US and UP voltages can be found on the EtherCAT P Box (black M8 socket). The EPP9001-0060 is an active EtherCAT device, i.e. it appears in the EtherCAT process image of the EtherCAT master, e.g. TwinCAT.
The EtherCAT P Box modules are characterized by their small and space-saving form factor.
Product status:
regular delivery
Product information
| Technical data | EPP9001-0060 |
|---|---|
| Protocol | EtherCAT P/EtherCAT |
| Bus interface | 1 x M8 socket, shielded, screw type, P-coded, 1 x M8 socket, shielded, screw type |
| Task within EtherCAT system | converter from EtherCAT P to EtherCAT + power |
| Number of channels | IN: 1 x EtherCAT P, OUT: 1 x EtherCAT |
| Nominal voltage | 24 V DC (-15 %/+20 %) |
| Total current | feed-in max. 3 A per US and UP |
| Current consumption from US | typ. 100 mA |
| Weight | approx. 90 g |
| Operating/storage temperature | -25…+60 °C/-40…+85 °C |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP65/66/67 (conforms to EN 60529)/variable |
| Approvals/markings | CE, UL |
| Housing data | EPPxxxx-006x |
|---|---|
| Dimensions (W x H x D) | 30 mm x 86 mm x 22 mm |
| Material | PA6 (polyamide) |
| Installation | 2 fixing holes 3.5 mm diameter for M3 |
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2023 - Terms of Use