DetachFixClose

EJ1100 | EtherCAT Coupler

EJ1100 | EtherCAT Coupler

EJ1100 | EtherCAT Coupler

EJ1100 | EtherCAT Coupler

EJ1100 | EtherCAT Coupler

EJ1100 | EtherCAT Coupler

EJ1100 | EtherCAT Coupler

EJ1100 | EtherCAT Coupler

EJ1100 | EtherCAT Coupler

EtherCAT plug-in modules of the EJ series

Efficient series machine manufacturing: plug-and-play in the control cabinet

EtherCAT plug-in modules: Bus Terminals for circuit boards

EtherCAT plug-in modules of the EJ series

Efficient series machine manufacturing: plug-and-play in the control cabinet

EtherCAT plug-in modules: Bus Terminals for circuit boards

The EJ1100 EtherCAT Coupler is the link between the EtherCAT protocol at fieldbus level and the EtherCAT plug-in modules. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation. A module station consists of a coupler and any number of EtherCAT plug-in modules, which are automatically detected and individually displayed in the process image.

 

Special features:

  • connection technology 2 x RJ45 socket
  • connection lengths up to 100 m

 

The EJ1100 has two RJ45 sockets. The upper Ethernet interface is used to connect the coupler to the network; the lower socket serves for the optional connection of further EtherCAT devices in the same segment.

 

The coupler supplies the attached plug-in modules with the current required for communication. The coupler can supply a maximum of 3.3 V and 2.2 A.

Product status:

Regular delivery

Product information

Technical dataEJ1100
Task within EtherCAT systemcoupling of EtherCAT plug-in modules (EJxxxx) to 100BASE-TX EtherCAT networks
Distance between stationsmax. 100 m (100BASE-TX)
Data transfer mediumIndustrial Ethernet/EtherCAT cable (min. Cat.5), shielded
ProtocolEtherCAT
Delaytyp. 1 µs
Data transfer rates100 Mbit/s
Bus interface2 x RJ45
Power supply24 V DC (-15 %/+20 %)
Current consumption from US60 mA + (∑ E-bus current/7.2)
Current supply E-bus2200 mA
Electrical isolation500 V (power contact/supply voltage/EtherCAT)
Weightapprox. 65 g
Operating/storage temperature-25…+60 °C/-40…+85 °C
Relative humidity95 %, no condensation
EMC immunity/emissionconforms to EN 61000-6-2/EN 61000-6-4
Vibration/shock resistanceconforms to EN 60068-2-6/EN 60068-2-27
Protect. rating/installation pos.IP20/see documentation
Approvals/markingsCE, UL
Housing dataEJ1100
Design formEtherCAT I/O plug-in module
Materialpolycarbonate
Installationon signal distribution board
Mechanical codingEJ plug-in module: signal-specific coding pins on the housing,
signal distribution board: holes in the printed circuit board
Lockinglatching lug in circuit board cut-out
Connection methodfield wiring: application-specific wiring level on the signal distribution board,
EJ plug-in module: 2 x 20-pin socket strip
Dimensions (W x H x D)44 mm x 66 mm x 55 mm

Loading content ...

Loading content ...

Loading content ...

Loading content ...

Loading content ...

Loading content ...

© Beckhoff Automation 2024 - Terms of Use