EJ1100 | EtherCAT plug-in module, EtherCAT Coupler, RJ45
EJ1100 | EtherCAT plug-in module, EtherCAT Coupler, RJ45
EJ1100 | EtherCAT plug-in module, EtherCAT Coupler, RJ45
EJ1100 | EtherCAT plug-in module, EtherCAT Coupler, RJ45
EtherCAT plug-in modules of the EJ series
EtherCAT plug-in modules: Bus Terminals for circuit boards
The EJ1100 EtherCAT Coupler is the link between the EtherCAT protocol at fieldbus level and the EtherCAT plug-in modules. The coupler converts the passing telegrams from Ethernet 100BASE-TX to E-bus signal representation. A module station consists of a coupler and any number of EtherCAT plug-in modules, which are automatically detected and individually displayed in the process image.
Special features:
- connection technology 2 x RJ45 socket
- connection lengths up to 100 m
The EJ1100 has two RJ45 sockets. The upper Ethernet interface is used to connect the coupler to the network; the lower socket serves for the optional connection of further EtherCAT devices in the same segment.
The coupler supplies the attached plug-in modules with the current required for communication. The coupler can supply a maximum of 3.3 V and 2.2 A.
Product status:
regular delivery
Product information
| Technical data | EJ1100 |
|---|---|
| Task within EtherCAT system | coupling of EtherCAT plug-in modules (EJxxxx) to 100BASE-TX EtherCAT networks |
| Distance between stations | max. 100 m (100BASE-TX) |
| Transmission medium | Industrial Ethernet/EtherCAT cable (min. Cat.5), shielded |
| Protocol | EtherCAT |
| Propagation delay | typ. 1 µs |
| Transmission rate | 100 Mbit/s |
| Bus interface | 2 x RJ45 |
| Power supply | 24 V DC (-15%/+20%) |
| Current consumption from US | 60 mA + (∑ E-bus current/7.2) |
| Current supply E-bus | 2200 mA |
| Electrical isolation | 500 V (power contact/supply voltage/EtherCAT) |
| Weight | approx. 65 g |
| Operating temperature | -25…+60°C |
| Storage temperature | -40…+85°C |
| Relative humidity | 95%, no condensation |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP20/see documentation |
| Approvals/markings | CE, UL |
| Housing data | EJ_44_2xRJ45_coupler |
|---|---|
| Weight | approx. 65 g |
| Protection rating | IP20 |
| Material | polycarbonate |
| Dimensions | Width (single) | 44 mm |
| Dimensions | Height | 66 mm |
| Dimensions | Depth | 55 mm |
| Installation | 2 x 20-pin socket strip on signal distribution board |
| Connection mechanism | application-specific plug on the signal distribution board |
| Mechanical coding | no |
Loading content ...
| Material compliance | EJ1100 |
|---|---|
| REACH SVHC | no |
| POP | compliant |
| RoHS | compliant with exemption |
| RoHS exemption | 7c-I: Lead-containing electrical and electronic components in glass and ceramic materials, excluding dielectric ceramics in capacitors |
| China-RoHS | www.beckhoff.com/china-rohs-io |
| CA Prop65 | www.beckhoff.com/prop65 |
| Disclaimer | This statement and the information contained above are, to the best of our knowledge and belief, accurate, based on the information we have received from our suppliers. This information is in line with the current standard of technology and our suppliers’ technical documentation. The absence of the substances is not verified by Beckhoff Automation by means of analytical tests. When addressed to our customers any information contained in this document is subject to the terms and conditions expressed in the governing customer agreement. Our general terms and conditions apply. |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2026 - Terms of Use