EP4174-0002 | EtherCAT Box, 4-channel analog output, multi-function, ±10 V, 0/4…20 mA, 16 bit, differential, M12
connection
2 | Rx+
3 | Rx-
4 | Tx-
2 | +24 V DC UP
3 | Output -
4 | GNDP
5 | Shield
2 | +24 V DC UP
3 | GNDS
4 | GNDP
EP4174-0002 | EtherCAT Box, 4-channel analog output, multi-function, ±10 V, 0/4…20 mA, 16 bit, differential, M12
The EP4174-0002 EtherCAT Box has four analog outputs which can be individually parameterized, so that they generate signals either in the -10…+10 V or the 0/4…20 mA range. The voltage or output current is supplied to the process level with a resolution of 15 bit (default), and is electrically isolated. The output scaling can be changed if required.
Ground potential for the four output channels is common with the 24 V DC supply. The analog actuators are supplied from the load voltage (freely selectable up to 30 V DC). The applied load voltage is available for actuator supply of further EtherCAT Box modules.
Product status:
regular delivery
Product information
| Technical data | EP4174-0002 |
|---|---|
| Protocol | EtherCAT |
| Bus interface | 2 x M8 socket, 4-pin, a-coded, shielded |
| Number of channels | 4 analog outputs |
| Output connections | M12 x 1, 5-pin, a-coded |
| Signal type | -10/0…+10 V | -20/0/4…+20 mA, parameterizable per channel |
| Nominal voltage | 24 V DC (-15%/+20%) |
| Load | > 5 kΩ | < 500 Ω |
| Resolution | 16 bit |
| Conversion time | ~ 40 µs |
| Measurement error/uncertainty | < 0.1% (relative to full scale value) |
| Output error | < 0.1% (relative to end value) |
| Actuator supply | from the auxiliary voltage UP |
| Power supply connection | feed: 1 x M8 male socket, 4-pin, a-coded; downstream connection: 1 x M8 female socket, 4-pin, a-coded |
| Electrical isolation | 500 V |
| Current consumption from US | 120 mA |
| Special features | current or voltage parameterizable per channel |
| Weight | approx. 165 g |
| Operating temperature | -25…+60°C |
| Storage temperature | -40…+85°C |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. rating/installation pos. | IP65/66/67 (conforms to EN 60529)/variable |
| Approvals/markings | CE, UL, ATEX, IECEx |
| Ex marking | ATEX: II 3 G Ex ec IIC T4 Gc II 3 D Ex tc IIIC T135 °C Dc IECEx: Ex ec IIC T4 Gc Ex tc IIIC T135 °C Dc |
| Housing data | 8 x M8, 4 x M12 |
|---|---|
| Dimensions (W x H x D) | 30 mm x 126 mm x 26.5 mm |
| Material | PA6 (polyamide) |
| Installation | 2 fixing holes 3.5 mm diameter for M3 |
Loading content ...
Loading content ...
Loading content ...
Loading content ...
© Beckhoff Automation 2025 - Terms of Use